Using The 12-Hour On And Off Timer - Sanyo SAP-K181A Technical & Service Manual

1. TIMER ON mode
(Example)
H
ON
NIGHT
MODE ON SETBACK
FLAP OFF
A/C
FAN SPEED SET
ACL
SENSOR
SELECT TIMER
BATTERIES
2. TIMER OFF mode
(Example)
H
OFF
NIGHT
MODE ON SETBACK
FLAP OFF
A/C
FAN SPEED SET
ACL
SENSOR
SELECT TIMER
BATTERIES
16
Using the 12-Hour ON and OFF
Timer
After the length of time set for TIMER ON elapses, the unit begins
operating.
The display depicted at left indicates that the air conditioner will begin
operating in three hours.
Setting procedure:
STEP 1 Press the MODE button and set the desired operation
mode and press the ON/OFF operation button.
(See ''Operation with the Remote Control Unit,'' page
12.)
STEP 2 Press the TIMER ON button.
STEP 3 Press the TIMER SET button (which advances the time
displayed) to set the time at which you want operation
to begin.
The time can be set for one to twelve hours, in one
hour steps.
The display changes immediately to its status previous to timer
•
setting, but the
To check the status of the timer while it is counting down, press the
•
TIMER SET button.
Cancellation procedure: Press the TIMER ON button once again.
After the length of time set for TIMER OFF elapses, the unit stops
operating.
The display depicted at left indicates that the air conditioner will stop
operating in five hours.
Setting procedure:
STEP 1 Press the TIMER OFF button.
STEP 2 Press the TIMER SET button (which advances the time
displayed) to set the time at which you want operation
to stop.
The time can be set for one to twelve hours, in one
hour steps.
The display changes immediately to its status previous to timer
•
setting, but the
To check the status of the timer while it is counting down, press the
•
TIMER SET button.
Cancellation procedure: Press the TIMER OFF button once again.
1 2 3.......12
indication remains.
1 2 3.......12
indication remains.
OI-226-16EG