Download Print this page

Burner Connection - IDEAL Falcon GTE 4 Installation And Servicing Manual

Falcon gte series

Advertisement

11 BURNER CONNECTION

Gas Supply
The gas supply MUST be sized in accordance with British
Gas recommendations.
The Local Gas Authority should be contacted, at a stage
prior to actual installation, for any advice or information
required.
Oil Storage Tank
The oil storage tank, oil supply pipe and connections to the
burner unit MUST comply with the requirements of BS. 799.
The installation should conform to the recognised
standards of good practice in the trade and comply with the
relevant Codes of Practice, building Regulations and Local
Authority, Fire and Insurance requirements.
IMPORTANT. The burner head deflector must go past the
door insulation as shown opposite.
Connection, adjustment, start-up and maintenance. (Refer
to the instructions delivered with the burner)
12 ASSEMBLY
Packaging:
The tables below show the numbers of the packages which
make up the boiler. The packages are listed in the order in
which they are opened for assembly.
Boiler
Boiler body delivered loose
- front section
- intermediate section
- rear section
- set of assembly rods
- accessory package
Assembled boiler body - optional
with accessories
Baffle Pack
Control Panel
- Standard
On/Off
- Optional
High/Low
Casing
The assembly of any optional devices purchased with the boiler
is described in the instructions supplied with the relevant
device or in the control panel instructions. The list of available
optional devices is provided in the applicable price list.
Falcon GTE -
Installation & Servicing
INSTALLATION
Stud Tappings
4XM8 on O150
4 Drilling dimple
marks on O197
GTE 4
GTE 5
1
1
2
3
1
1
-
-
IL 4
IL 5
IL 24
IL 25
IL 35
IL 36
3 Baffles
2 Baffles
IC7
IC7
-
-
IL 14
IL 15
Burner plate
cut out O112
Prepared
knockout
for O130
Tools required:
-
Phillips head screwdriver
-
Wide flat screwdriver
-
13 and 17mm spanners
GTE 6
GTE 7
1
1
4
5
1
1
1
1
IL 6
IL 7
IL 26
IL 27
IL 37
IL 37
2 Baffles
2 Baffles
IC7
IC7
-
DR31
IL 16
IL 17
Ø 305
deflector
-
hammer
-
Silicone glue
-
JDTE assembly tool
-
Simplified assembly tool
GTE 8
1
6
1
1
IL 8
IL 28
IL 36
2 Baffles
IC7
DR31
IL 18
110
11

Advertisement

loading

This manual is also suitable for:

Falcon gte 5Falcon gte 6Falcon gte 7Falcon gte 8