Setting Up Your Monitor; Connecting And Turning On Your Monitor - Lenovo L2264A User Manual

Setting up your monitor

This section provides information on how to set up your monitor.

Connecting and turning on your monitor

Note: Be sure to read the Safety information on page iii before carrying out this procedure.
1.
2.
3.
Power off your computer and all attached devices, then unplug the computer power cord.
Connect one end of the analog signal cable to the monitor VGA (Analog) connector and
the other end to the computer.
Connect one end of the HDMI cable to the monitor HDMI port and the other end to the
computer if it has HDMI output terminal.
HDMI
1-5
Chapter 1.