4.
Insert the Adapter into the monitor, then plug the monitor power cord and the computer
cord into grounded electrical outlets. This monitor use two kinds of adapters, ROW: Non-
Wall Plug 3 pin (power brick) US: Wall Plug 3pin (power brick).
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC
60227 (designation H05VV-F 3G 0.75mm
Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation
H05RR-F 3G 0.75mm
Adapter
Adapter
²
or H05VVH2-F2 3G0.75mm
²
) shall be used.
²
) shall be used.
1-6
Chapter 1.
Need help?
Do you have a question about the L2264A and is the answer not in the manual?
Questions and answers