Contents Safety information .......................... iii General Safety guidelines..................................iii Chapter 1. Getting started ......................1-1 Shipping contents ....................................1-1 Notice for use ....................................... 1-2 Product overview....................................1-3 Types of adjustments ..................................1-3 Tilt........................................1-3 Monitor controls....................................1-4 Cable lock slot....................................1-4 Setting up your monitor ..................................
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. Před instalací tohoto produktu si pročtěte Bezpečnostní informace.
Chapter 1. Getting started This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information. Shipping contents The product package should include the following items: • Information Flyer • Flat Panel Monitor •...
Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. 1. Place your monitor with the screen face down on a soft flat surface. 2.
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Chapter 1.
Monitor controls The keypad controls on the panel frame are accesses to various functions. For information on how to utilize these keypad controls, please see "Adjusting your monitor image"on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor. Chapter 1.
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information on page iii before carrying out this procedure. Power off your computer and all attached devices, then unplug the computer power cord. Connect one end of the analog signal cable to the monitor VGA (Analog) connector and the other end to the computer.
Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm or H05VVH2-F2 3G 0.75mm...
Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you.
For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system;...
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On-Screen Display (OSD) is not displayed. Icon Control Description Press and hold for 10 seconds to enable or disable the DDC-CI DDC-CI function Exit...
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. Adjusts overall screen Brightness/Contrast Exit To use the controls: Press to open the main OSD menu. 2. Use to move among the icons. Select an icon and press to access the selected function.
Table 2-1. OSD functions OSD Icon on Main Submenu Description Menu Brightness Adjusts overall screen brightness. Contrast Adjusts difference between light and dark areas. Brightness/ Contrast Horizontal Position Moves image left or right. Vertical Position Moves image up or down. Image Position Automatic Optimizes image (size, position, phase and clock).
Table 2-1. OSD functions OSD Icon on Main Submenu Description Menu Information Shows resolution, refresh rate, and product details. Note: This screen offers information only, and (does) not allow for setting changes. Options Language Changes languages of menu. Note: The selected language only affects the language of the OSD.
Selecting a supported display mode The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes. The image size, position and shape might be changed when the display mode changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. •...
Step 3: Remove the base and stand from the monitor, refer to "Detaching the monitor base and stand"on page 2-9". Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), the type of VESA mounting screw is M4 x 10 mm. VESA hole Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting kit.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 60DF-AAR1-WW Dimensions Depth 187.3 mm (7.37 in.) Height 372 mm (14.65 in.) Width 456 mm (17.95 in.) Stand...
Table 3-1. Monitor specifications for type-model 60DF-AAR1-WW Supported display modes Horizontal frequency 30 KHz - 83 KHz Vertical frequency 50 Hz - 75 Hz Native Resolution 1440 x 900 at 60 Hz Temperature Operating 0° to 45° C (32° to 113° F) Storage -20°...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power The video signal cable Be sure the video cable is "Connecting and indicator is amber, is loose or disconnected connected with the system turning on your but there is no from the system or properly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 7 operating system. From the Lenovo website http://support.lenovo.com/docs/E2054A, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 8/8.1 operating system. From the Lenovo website http://support.lenovo.com/docs/E2054A, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).
Color Matching Profiles. On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1440 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Scratches or punctures on monitor screens. Service parts The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to supprot the customer warranty. Parts are for service use only. The table below shows information for model E2054A.
Product replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. A Lenovo technical support representative can help you determine the best alternative.
(Arabic,English) El Salvador 800-6264 (Spanish) Estonia 372-66-0-800 (Estonian, Russian, English) Finland Warranty service and support: +358-800-1-4260 (Finnish) France Warranty service and support: 0810-631-213 (hardware) (French) Germany Warranty service and support: 0800-500-4618 (toll-free) (German) Greece Lenovo Business Partner (Greek) Appendix A.
(Spanish) Honduras Dial 800-0123 (Spanish) Hungary +36-13-825-716 (English, Hungarian) India Primary: 1800-419-4666 (Tata) Secondary: 1800-3000-8465 (Reliance) Email: email@example.com (English and Hindi) Indonesia 1-803-442-425 62 213-002-1090 (Standard Charges Apply) (English, Bahasa Indonesia) Ireland Warranty service and support: 01-881-1444 (English) Israel Givat Shmuel Service Center: +972-3-531-3900...
Country or Region Telephone Number Panama Lenovo Customer Support Center: 001-866-434 (toll-free) (Spanish) Peru 0-800-50-866 OPCION 2 (Spanish) Philippines 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Poland Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999...
Country or Region Telephone Number Vietnam 120-11072 (Toll Free) 84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English) Appendix A.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.