Using The On-Screen Display (Osd) Controls - Lenovo L2264A User Manual

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
Brightness
To use the controls:
1. Press to open the main OSD menu.
2. Use or
function. If there is a sub-menu, you can move between options using
press to select that function. Use
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
Brightness/Contrast
Contrast DCR GAME Bright/dim adjust
Exit Left
Right
to move among the icons. Select an icon and press
for 10 seconds to lock the OSD. This will prevent accidental
Hz
Refresh rate
OK
or to make adjustments then press
for 10 seconds to unlock the OSD and allow
to access that
or , then
to save.
for 10 seconds to
2-4
Chapter 2.