D-Link DGS-1210-20 Reference Manual page 78

4 Configuration
IPv6 Class (0-255): Specify the class of access rule. The field range is from 0 to 255.
ICMPv6 Type: Sets the ICMP Type field as an essential field to match.
Code (0-255): Sets the ICMP code field as an essential field to match.
Source IPv6 Address: Defines the range of source IP addresses, relevant to the ACL rules. For example, to
set 2002:0:0:0:0:0:b0d4:0, use mask 128.
Destination IPv6 Address: Defines the range of destination IP addresses, relevant to the ACL rules. For
example, to set 2002:0:0:0:0:0:bfd4:0, use mask 128.
Action: Specify the ACL forwarding action matching the rule criteria. Permit forwards packets if all other
ACL criteria are met. Deny drops packets if all other ACL criteria is met.
Click Next button then the ACL profile is added.
To define the IPv6 ACL TCP profile: Select IPv6 ACL with TCP of Protocol Type and click Next button.
The updates to show the follows:
Figure 4.104 - Add Access Rule – IPv6 UDP
Figure 4.105 - Add Access Rule – IPv6 TCP
7 3
7 3
D-Link Web Smart Switch User Manual