Login Web-Based Management; Smart Wizard; Web-Based Management; D-Link Network Assistant (Dna) - D-Link DGS-1210-20 Reference Manual

3 Getting Started

Login Web-based Management

In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the
same subnet as the switch. For example, if the switch has an IP address of 10.90.90.90, the PC should have
an IP address of 10.x.y.z (where x/y is a number between 0 ~ 254 and z is a number between 1 ~ 254), and
a subnet mask of 255.0.0.0. There are two ways to launch the Web-based Management, you may either click
the Web Access button at the top of the SmartConsole Utility or open the web browser and enter 10.90.90.90
(the factory-default IP address) in the address bar. Then press <Enter>.
The web configuration can also be accessed through the SmartConsole Utility. Open the SmartConsole
Utility and double-click the switch as it appears in the Monitor List. This will automatically load the web
configuration in your web browser.
When the following logon dialog box appears, enter the password and choose the language of the Web-
based Management interface then click OK.
The switch supports 10 languages including English, Traditional Chinese, Simplified Chinese, German,
Spanish, French, Italian, Portuguese, Japanese and Russian. By default, the password is admin and the
language is English.

Smart Wizard

After a successful login, the Smart Wizard will guide you through essential settings of the D-Link Web Smart
Switch. Please refer to the Smart Wizard Configuration section for details.

Web-based Management

By clicking the Exit button in the Smart Wizard, you will enter the Web-based Management interface. Please
refer to Chapter 4 Configuration

D-Link Network Assistant (DNA)

The D-Link Network Assistant (DNA), included in the installation CD, is a program that allows administrators
to quickly discover all D-Link smart switches and D-Link Discover Protocol (DDP) supported devices (for a
list of supported models, refer to the D-Link Network Assistant (DNA) User Guide), that are in the same
subnet as the PC, collect traps and log messages, and provide quick access to basic configurations of the
switch. This tool is only for computers running Windows 7, Vista, XP, or 2000 on both 32/64bit systems.
There are two options for the installation of the DNA; one is through the Autorun program on the installation
CD and the other is manual installation.
Figure 3.2 –Enter the IP address 10.90.90.90 in the web browser
NOTE: The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
Figure 3.3 – Logon Dialog Box
for detailed instructions.
12
D-Link Web Smart Switch User Manual