Audio Clips - Axis Q6054 User Manual

AXIS Q6054 PTZ Dome Network Camera
Video and Audio
For more information about these settings, please see the online help
Audio Output
An external speaker can be connected to the Audio-out connector (an active speaker with built-in amplifier is required for this). The
output can be connected to another amplifier with speakers. A stereo connector must be used for the audio out.
Configure the audio output settings under Video & Audio > Audio Settings.
Note
An Axis multicable (see Axis multicable on page 62) is required when connecting external audio equipment to the Axis product.
Output gain - Control the volume of the line audio output. If the sound is too low, choose a higher dB value. If the sound is
too high, choose a lower dB value.

Audio Clips

An audio clip is a sound file that can be played when events occur or directly from the Live View page. The audio clip must first be
uploaded to the Axis product or recorded by a microphone connected to the product.
To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips. For more information see the online help
To configure the Axis product to play audio clips when an event occurs, an action rule must be set up. For more information,
see Events on page 40.
Note
Audio clips cannot be used if the product's audio functionality is enabled. The audio functionality is enabled on the Audio
tab under Video & Audio > Video Stream.
.
27
.