Features - Hitachi P42T01E Service Manual

PRECAUTIONS
Cleaning the plasma screen panel of the monitor
Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.
To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or
hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If this
is not sufficient, use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
Cleaning the cabinet of the monitor
Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neu-
tral detergent in water, wet and wring out the soft cloth thenwipe with a dry soft cloth.
Never use acid/alkaline detergents, alcoholic detergents, abrasive cleaners, soap powder, OA cleaners, car
wax, glass cleaners, etc. because these cause discoloration, scratches or cracks.
Information for users applicable in European Union countries
This symbol on the product or on its packaging means that your electrical and electronic
equipment should be disposed at the end of its life separately from household waste.
There are separate collection systems for recycling in EU. For more information, please con-
tact the local authority or the dealer where you purchased the product.

1. Features

Large-screen, high-definition plasma display panel
The 50-inch colour plasma display panel, with a resolution of 1280 (H) x 1080 (V) pixels, and the 42-inch colour plasma
display panel, with a resolution of 1024 (H) x 1080 (V) pixels, creates a high-definition, large-screen (aspect ratio:
16:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient
power lines, the panel produces high-quality display images free from colour misconvergence and display distortion.
High Performance Digital Processor
A wide range of input signals can be handed, including composite, component and HDMI. High Definition Digital
Processor creates the fine-textured image with dynamic contrast.
Easy-to-use remote control and on-screen display system
The remote control included eases the work of setting display controls. Further, the on-screen display sys-
tem displays the status of signal reception and display control settings in an easy-to-view fashion.
Connecting to an Audio Visual Device
• Three Scart terminals
added. A composite video output terminal is also provided as a monitoring output.
*1
AV1 scart applies composite/ S-video
AV2 and 3 scart applies composite/ RGB
*2
AV5 composite/S-Video=Side Input
*3
AV4 can be connected to the equipment with either component or composite Output.
SD card slot installed
Power Swivel Feature
Allows turning the plasma display left or right within ±30 degree using the remote control.
P50T01U/E P50TP01U/E P42T01U/E P42TP01U/E
*1
, composite/S terminal
*2
, a component terminal
2
*3
and two HDMI terminals have been