Table of Contents
Advertisement
Appendix
Appendix
Expand your telephone system
The handset provided within your product package is already registered as
HANDSET 1. You can add new handsets (LS6105/LS6105-13/LS6105-15/
LS6105-16/LS6105-17, purchased separately) to your telephone base. Additional
handsets are assigned numbers in the sequential order they are registered (up to
HANDSET 5).
Your telephone base can support up to five handsets. Each handset must be
registered to the telephone base before use.
Add and register a handset
When first purchased, each expansion handset alternately shows To register HS...
and ...see manual. The new handset should be charged without interruption for at
least 30 minutes before registering it to the telephone base.
To register a handset:
1. Press and hold /FIND HANDSET at the telephone base
for about four seconds until the IN USE light turns on.
2. Press
on the cordless handset. Then it shows
Registering... The cordless handset show Registered
and you hear a beep when the registration process
completes. The registration process takes about
60 seconds to complete.
If registration fails, the handset displays Failed. Please start
again from Step 1 above.
• You cannot register a handset if any other system handset
is in use.
• If you have not set the date and time for the telephone
system, the handset will prompt you to set the date and
time after it is registered to the base. To skip setting, press
CANCEL.
50
Advertisement
Table of Contents
