Table of Contents
Advertisement
C. Installing Non-combustible Facing Mate-
rial (Outdoor Side)
WARNING
Fire Risk.
• Follow these instructions exactly.
• Facing materials must be installed properly to
prevent fire.
• No materials may be substituted
without authorization by Hearth & Home
Technologies.
• Center and attach two top boards (the two shorter pieces)
to the framing members. See Figure 5.8.
• Attach the left and right side pieces to the framing mem-
bers. See Figure 5.8.
• Use fasteners from fastener packet (in manual bag) in
shaded areas. See Figure 5.9.
• Use regular sheet rock screws in shaded areas (non-
combustible board.
Apply fasteners from
fastener packet
in these areas.
Figure 5.8 Attaching Non-combustible Facing Material
(Outdoor Side Only)
16
Outdoor Lifestyles by Hearth & Home Technologies • TWILIGHT-II-MDC Installation Manual • 2369-970 Rev. L • 8/19
NON-COMBUSTIBLE
FACING MATERIAL
48-5/8 in.
Figure 5.9 Complete Installation of Non-combustible
Facing Material (Outdoor Side)
• Use a wet or dry towel or soft brush to remove dust or
dirt from facing material.
• Apply a non-combustible adhesive to attach tile, stone
or other non-combustible finishing materials per manu-
facturer's instructions.
47-5/8 in.
Advertisement
Table of Contents
