Table of Contents
Advertisement
CAUTION:
When using electric screwdrivers, be careful not to touch the camera
components while attaching the screws. Since electric screwdrivers vary in sizes, speed, and
force, they may bruise and damage the camera components.
DISCLAIMER:
LevelOne will not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.
Step 4: Connect the Cable
1. Connect the network cable to the Ethernet port of the camera. If necessary, connect other
cable connectors (optional), like audio input/output and DI/DO to the connector on the
camera. See
Before Installation
Ethernet Port
2. Connect the other end of the network cable to a switch or injector. Then, connect the switch
or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection
example below.
Hardware Manual
on page 10.
Network
Ethernet Cable
Ethernet Cable
(Data)
PoE Injector /
PoE Switch
Ethernet Cable
(Data + Power)
Camera
17
Digital Input / Output (DI/DO)
and Audio Input / Output
Connector
Power Cable
AC Power
Source
Advertisement
Table of Contents
