Table of Contents
Advertisement
High Voltage DO Device Connection
Even though the camera provides 12V power, this may not be enough for some high voltage DO
devices, such as a ceiling light or a motor that opens or closes a gate. In this case, there is a
need to connect an external relay. See wiring scheme below:
Note that when choosing an appropriate relay, please refer to its specifications and make sure
they match the above design. The triggering circuit voltage has to be around 12V DC and the
switch-controlled circuit voltage has to match the external power supply (e.g. 110V AC or 220V
AC).
The illustration below is a graphic example of connecting a relay to a high voltage DO device.
NOTE:
For more information on DI/DO connections, please refer to the Knowledge Base
article on our website.
Hardware Manual
Relay
(DO1 Device)
)
Camera
12
110V-220V AC
External Power
Source
Illuminator
Advertisement
Table of Contents
