How To Connect Audio Devices - LevelOne FCS-3056 Hardware User Manual

How to Connect Audio Devices

Audio input / output devices, such as an active microphone or speaker can be connected to the
camera using the supplied terminal block.
Press and hold the orange tab as you insert the wire through the pin slot, then release the orange
tab to secure the wire.
For DI/DO Use
To connect audio devices, map the pins to one of the pin combinations below:
Device
Audio Output (AO)
Audio Input (A1)
NOTE: For more information about AUDIO in connections, please refer to the Knowledge Base
article on our website.
Hardware Manual
Pin Mapping Instructions
AO_GND Connect the wires of the audio output device to
AO_GND and A_OUT.
A_OUT
AI_GND Connect the wires of the audio input device to
AI_GND and A_IN.
A_IN
13