1. Manuals
  2. Brands
  3. XtendLan Manuals
  4. DVR
  5. DVR-880E
  6. User manual

XtendLan DVR-880E User Manual

Hide thumbs Also See for DVR-880E:
Table of Contents

Advertisement

Quick Links

Download this manual
DVR-880E / x80V / x81V
DVR-x80VH / x81VH
DVR-Hx8x
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVR-880E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for XtendLan DVR-880E

Summary of Contents for XtendLan DVR-880E

  • Page 1 DVR-880E / x80V / x81V DVR-x80VH / x81VH DVR-Hx8x User manual...

  • Page 2: Table Of Contents

    Content 1 Production Introduction .................. 2 1.1. Product overview ................2 1.2. Main functions ................. 2 2 Open-package check and cable connections ..........3 2.1. Open-package check ............... 3 2.2. Hard disk installation ................ 4 2.3. Shelf installation ................5 2.4.

  • Page 3: Production Introduction

    1 Production Introduction 1.1. Product overview The series DVR is designed specially for security and defence field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format and G.711A audio compressed format which insures the high quality image, low error coding ratio and single frame playing.

  • Page 4: Open-Package Check And Cable Connections

    ·individual real-time video recording as well as searching, playback, network surveillance, recording check, downloading and so on ·multi-playback mode ·zoom at arbitrary region Net operating ·through net tele-surveillance in the real time ·tele-PTZ control ·tele-recording check and real-time playback Alarm linkage ·Alarm activated video record,tour ,message,buzzer,e-mail,ftp Communication interface ·RS485 interface which fulfills the alarm input and PTZ control...

  • Page 5: Hard Disk Installation

    Front panel and rear panel  The key function specification in the front panel and the interface specification in the real panel are in the specification.  Please check the product type in the front panel whether is accordant with the product type you order.

  • Page 6: Shelf Installation

    2.3. Shelf installation This product chassis specification for the standard 1u,so it can be installed in the standard shelf. Installation steps and attention items: 1、Make sure the temperature in the room lower then 35℃. 2、Keep the equipment have 15cm(6 inches)space around in order to air's circulation.

  • Page 7: Rear Panels

    2.5. Rear panels The rear panel of DVR-880E: The rear panel of DVR-880V: The rear panel of DVR-1680V:...

  • Page 8: Audio And Video Input And Output Connections

    2.6. Audio and video input and output connections 2.6.1 Video input connections The video input port is BNC connector plug. The demand of input signal is PAL/NTSC ,75Ω). BNC(1.0V The video signal must be accorded with the state standard which has the high signal to noise ratio, low aberration and low interference.
  • Page 9 configuration). When replace the monitor by the computer display, there are some issues to notice 1、 Do not stay in the turn-on state for a long time. 2、Keep the computer display normal working by demagnetizing regularly. 3、Stay away from the electro magnetic Interference. TV is not a credible replacement as a video output.

  • Page 10: Alarm Input And Output Connections

    2.7. Alarm input and output connections Before connecting the device,please pay attention to follow situations: Note: some DVRs have no alarm input/output functions. １.Alarm input Alarm input is grounding alarm input. Alarm input demand is the grounding voltage signal. C. When the alarm is connected with two DVRs or connected with DVR and other equipments, it should be isolated by relay.
  • Page 11  eight external alarm interface (1) alarm input 1,2,3,4 (2) ground (3) RS232 (4) RS485 (5) alarm input 5,6,7,8 (6) ground (7) alarm output  sixteen external alarm interface ①⑥⑧alarm input ②⑦ground ③alarm output ⑤RS485 ④RS232 Parameter meaning grounding RS232 port 485communciate interface which is connected with the recording control equipments such as the decoder...
  • Page 12 2.7.1 Alarm input port specification 8 channels alarm input. Alarm input type unlimited. The grounding and the com port of the alarm sensor are parallel (The alarm sensor is external power supply) . The grounding of the alarm and the DVR should be shared. The NC port of the alarm sensor must be connected with the DVR alarm input port.

  • Page 13: Speed Dome Connections

    2.8 Speed dome connections 1. Connect the 485 lines of the speed dome with the DVR 485 interface. the 485 interface of eight external alarm the 485 interface of sixteen external alarm 2.Connect the video line with the DVR video input. 3.Electrify the speed dome 3 Basic operation 3.1 Turn on...

  • Page 14: Turn Off

    3.1 Turn off There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switch. Pressing the power supply switch is called hard switch. Illumination: 1、Auto resume after power failure If the DVR is shut down abnormally, it can automatically backup video and resume previous working status after power failure.

  • Page 15: Preview

    Picture 3.1 System Login Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked. (Through reboot or after half an hour, the account will be unlocked automatically). For your system security, please modify your password after first login.
  • Page 16 Shortcut menu in full analog(DVR)/Hybrid(HVR) mode Shortcut menu in full digital(NVR) mode Picture 3.2 Shortcut Menu *compare to analog/hybrid mode's shortcut menu,the full digital mode do not have color setting function. 3.5.1 Main menu When you login, the system main menu is shown as below.
  • Page 17 Picture3.3 Main Menu 3.5.2 Playback There are two methods for you to play the video files in the hard disk. 1、 In the desktop shortcut menu. 2、 Main menu>Record->Playback Note: The hard disk that saves the video files must be set as read-write or read-only state.(4.5.1). Picture 3.4 video playback 1.
  • Page 18 【Playback control】See detail in below chart Function Function Play/Pause Backward play Slow forward Fast forward Previous frame Next frame Previous file Next file Round play Full screen Stop Picture 3.5 Playback control key Note: play under frame by frame, the playback status should be paused firstly. 【Operation tips】show function of the key that cursor placed.
  • Page 19 Picture 3.8 Record Mode 【Schedule】Record according to the configuration. 【Manual】Click the all button and the according channel is recording no matter the channel in any state. 【Stop】Click the stop button and the according channel stops recording no matter the channel in any state.
  • Page 20 3.5.5 PTZ control *Not all DVR has PTZ function *PTZ control is a little different between hybrid mode & full digital mode: Digital channel – the digital channel need link PTZ, the remote device should connect with PTZ and with protocol correctly set also. Analog channel –...
  • Page 21 【Set】Enter the function operation menu. 【Page switch】Switch between different pages. Special functions： 1、Preset Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position 1）Preset option Set a location for the preset, procedure is as follows: Step1: in Picture 3.10, click the Direction button will turn into preset position , click the Settings button to enter Picture 3.11.
  • Page 22 Value input blank Picture 3.12 PTZ Control 2、Cruise between Points Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on the line 1）Cruise Between Points Settings Cruise lines is connected by multiple preset points, setting procedure is as follows: Step1: In Picture 3.10, the Direction key will turn PTZ to designated location , click Settings button to enter Picture 3.13, Step 2: click Cruise buttons, the write proper value into the Cruise Line and Preset Points...
  • Page 23 Preset Points Blank Cruise Button Time interval Cruise Line Blank Picture 3.13 Cruise Between Points Settings 2）The Calls of Cruise between Points In Picture 3.10, click Page Shift button, enter PTZ control menu as shown in Picture 3.12. Please input the number of cruise in the value blank, then click Cruise between Points button, PTZ begins to work on the cruise line.
  • Page 24 2）Scan Calls In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12. Please input the number of scan in the value blank , then click Scan button，PTZ begins to work on the scan line . Click Stop button to stop. 4、Boundary Scan In a horizontal line，set up a line，call scan，PZT repeat operation according to the route 1）Boundary Scan setup...
  • Page 25 5、Horizontal Rotating Click Horizontally Rotating button, PTZ begins to rotate horizontally (relative to the original position of the camera). Click the Stop button to stop. 6、Rotate Click on horizontal Rotating button, PTZ turn around. 7、Reset PTZ restart, all the data clears to 0. 8、Page Shift In Picture 3.12, click Page Shift button into Picture3.16, setting auxiliary function.
  • Page 26 parameters include: tonality, brightness, contrast, saturation. You can set different parameters at different time sections. Picture 3.18 Color Setting 3.5.7 Output Adjust *Hybrid mode is with black margin vertical & horizontal, while full digital mode without. Adjust TV output area parameters. You can use the desktop shortcut menu or enter [main menu]> [management tools]>...
  • Page 27 Picture 3.20 Logout/Shutdown/Reboot the system 【logout】Quit the menu. Offer password next entrance. 【shut down】Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint. After three seconds, the system is shut down. Cancel midway is of no effect. 【reboot】Quit the system.

  • Page 28: Main Menu

    4 Main menu 4.1 Main menu navigation Main menu Sub menu Function Config Set the recording configuration, recording type, recording time section playback Set recording search, recording play, video file storage Record Set screen capture period, type ,etc. Storage Note：not all DVRs have this function. backup Detect backup device, format device, back the selective files Set motion detect alarm channel, sensitivity, area, linkage parameters:...
  • Page 29 Set algorithm rule: trajectory display、sensitivity、minimum pixel、alert mode， and setting linkage parameters:period、 alarm output、 the screen Intelligent prompt、record、PTZ、tour、buzzer、EMAIL、FTP upload. analysis Note：not all DVRs have this function. General Set system time, data format, language, hard disk full time operation, configuration machine number, video format, output mode, summertime, stay time Set main (extra) coding parameter: code mode, resolving ability, frame rate, code stream control, image quality type, code stream value, frame Encode...
  • Page 30 Set channel mode, check channel status and configure the digital Digital channel, etc. Note：not all DVRs have this function. Hard disk Set appointed hard disk as read-write disc, read-only disc or redundant management disc, clear data, resume date and so on User Modify user, team or password.

  • Page 31: Record

    4.2 Record Operations related to record, including: Record, Playback, Backup, Screen shot(only Hybrid mode and full analog have) 4.2.1 Record Configuration Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive recording in the first startup. You can enter [main menu]> [recording function]> [recording setup] to set. Note:There is at least one read-write hard disk.（refer to chapter 4.5.1）...
  • Page 32 Manual:Click the button and the according channel is recording no matter the channel in any state. Stop:Click the stop button and the according channel stops recording no matter the channel in any state. 【Period】Set the time section of common recording, The recording will start only in the set range. 【Record type】Set recording type: regular, detection or alarm.
  • Page 33 Picture 4.2 Backup 【Detect】Detect the storage connected with the DVR such as hard disk or universal disk. 【Backup】Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time. Picture 4.3 Backup Remove：Clear the file information.
  • Page 34 Backup format：configurate the backup file format,according to require,can choose Start/pause： Click the play button to start the backup and click the pause button to stop the backup. Note：During backup you can exit the page layout to carry out other functions. 【Burning】the file will be burned synchronously after click it.
  • Page 35 Schedule：Realise snapshot according to record type(regular,detect and alarm)and period Manual：No matter what the present channel is in a state,once choose"manual"button,it will have snapshot at related channels. Stop：No matter what the present channel is in a state,once choose "stop"button,it will stop snapshot at related channels.
  • Page 36 Video detect in Hybrid mode Video detect in full digital(NVR) mode Pic 4.4 【Channel】Choose the set motion detect channel. 【Enable】■ means that the motion detect function is on.
  • Page 37 【Sensitivity】Choose in the six options according to the sensitivity. Note: Only the motion detect under hybrid mode/ full analog mode have this function of setting sensitivity, and also only the analog channel can set region. 【Region】Click [set] to enter the set area. The area is divided into PAL22X18. Red block means the motion detect defensive area.
  • Page 38 【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval. 【Alarm output】 Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on. 【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds.
  • Page 39 Note：FTP upload need be set at [Netservice] 【Buzz】When alarm happens, device will come out with buzz. 4.3.2 Video Blind When the video image is influenced by the environment such as bad brightness or reaching the set sensitivity parameter, the camera mask function is turned on and the linkage function is turned on. *Same as motion detect function, video blind is different between Hybrid mode &...
  • Page 40 Video blind in full digital(NVR) mode Pic 4.8 Video blind Set method: refer to chapter 4.3.1. Motion detect 4.3.3 Video Loss When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is turned on. *Same as motion detect function, video loss is different between Hybrid mode &...
  • Page 41 Video loss in Hybrid(HVR) mode Video loss in full digital(NVR) mode Pic 4.9 Video loss Set method: refer to chapter 4.3.1. Motion detect...
  • Page 42 4.3.4 Alarm input When the equipment obtains the external alarm signal, the alarm function is turned on. Alarm input is the same between hybrid mode & full digital mode, function enable, when it was set normal, only need to connect alarm sensor at alarm input port on local side, the alarm information is occurring, and will link to related setting functions at the same time Alarm input in Hybrid(HVR) mode Pic 4.10 Alarm input...
  • Page 43 4.3.5 Alarm output Refer to chapter 3.5.4. 4.3.6 Abnormal Analysing and inspecting current software and hardware of the device: When some abnormal events happen,the device will make a relative answer such as show message and buzzer. Picture 4.11 Abnormal 【Event Type】 selecting abnormity you want to inspect 【Enable】...
  • Page 44 Pic 4.12 Intelligent analysis setting page 【Channel No.】only shows by “1”，at present, only the 1 channel with maximum resolution of 1080P in the full analog(DVR) mode and hybrid(HVR) mode 【Enable】tick it to enable the video analysis function, then can go for further setting, 【Algorithm rule】at drop-down box to choose the algorithm rule of detection, 【Rule】choose different algorithm rules, the related setting page is different.
  • Page 45  Rules click setting， enter rule setting page, right click mouse, choose add, use mouse to fix two or more point, and then connect them to form a line or a irregular region, after that a box of prohibited direction options will come out, choose one of them, right click mouse, click Yes, return to previous page, click Yes, alarm rules setting is finished.
  • Page 46 Pic 4.14 rule setting - items care Video diagnosis:  Sensitivity , base on different requirement, there are 3 options in the drop-down box;  Detection type: there are 8 kinds of detection type: Brightness anomaly detection 、 Sharpness detection、 Noise detection、 Color cast detection、 Screen freezes detection、 Scene change detection、 Anthropogenic interference and PTZ runway detection.Can choose one or more types if necessary, when video detect selected type, the alarm will be triggered.
  • Page 47 For example： enable video analysis function, algorithm rules is PEA, the alert way in the rule is Cordon, prohibited direction is bidirectional, when a moving object across this warning line, alarm is triggered, see below pic4.16 Pic 4.16 the alarm image regarding one of the video analysis Video Teaching http://v.youku.com/v_show/id_XNDY5Mjc0OTcy.html ,cordon...
  • Page 48 4.4.1 General Picture 4.17 General setup 【System time】Set the system data and time. 【Date format】Choose the data format: YMD, MDY, DMY. 【Date Separator】Choose list separator of the data format. 【Time Format】Choose time format: 24-hour or 12-hour. 【Language】support 29 language at present: Arabic,Czech,English,Finnish,Greek,Indonesian,Italian,,Japanese,Portuguese,Russian,Thai,T-Chin ese,S-Chinese,Turkish,Brazilian,Bulgarian,Farsi,French,German,Hebrew,Hungarian,Polish,Romanian,Spani...
  • Page 49 Picture 4.18 DST (week) Picture 4.19 DST (date) 4.4.2 Encode setup Set the video/audio code parameter: video file, remote monitoring and so on. Set every main stream parameter in the left part, and set the extra stream parameter in the right part. Note: extra stream introduces video compression technique which was applying for multi-channel playback simultaneously, Dial-up multi-channel real-time monitor under poor bandwidth, or mobile monitor and so on.
  • Page 50 Picture 4.20 Encode setup Independent channel code setting 【Channel】Choose the channel number. 【Compression】Standard H.264 main profile. 【Resolution】Resolution type:1080P/720P/960H/D1/ HD1/CIF / QCIF. 【Frame Rate】P:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s 【Bit Rate Type】 You can choose limited code stream or variable code stream. When you choose the variable code stream there are six image quality options.under the limited code stream，you can choose the code stream manually；...
  • Page 51 4.4.3 Network setup Picture4.21 Network 【Net Card】You can choose cable network card or wireless network card. 【DHCP Enable】Obtain IP address automatically(not suggested) Note：DHCP server is preinstalled. 【IP address】Set the IP address. Default: 192.168.1.10. 【Subnet mask】Set the subnet mask code. Default: 255.255.255.0. 【Gateway】Set the default gateway.
  • Page 52 4.4.4 NetService Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters. Picture 4.22 NetService 【PPPoE setup】 Picture4.23 PPPOE Enable：Reverse■ means choose,setting can become effective. Input the user name and password that ISP （...
  • Page 53 【NTP setup】 Picture 4.24 NTP The NTP server must be installed in the PC. Enable： Reverse■mean choose，setting can become effective. Host computer IP:Input the IP address installed NTP server. Port:Default: 123. You can set the port according to NTP server. Time zone:London GMT+0 Berlin GMT +1 Cairo GMT +2...
  • Page 54 Picture 4.25 EMAIL SMTP server:Email server address. It could be an IP address or domain name. Domain name can be translated only it is the correct DNS configuration. Port:Email server port number. SSL:Decide whether using Secure Socket Layer protocol to login. User Name:Apply the email server user name.
  • Page 55 Picture 4.26 IP FILTER 【DDNS】 Picture 4.27 DDNS setup It is the abbreviation of dynamic domain name server. Local domain name：Provide the domain name registered by DDNS. User name：Provide the account registered by DDNS. Password： Provide the password registered by DDNS. When the DDNS is successfully configured and start, you can connect the domain name in the IE address column to visit.
  • Page 56 Picture 4.28 FTP setup 【Enable】Click Enable,then all settings will be available 【Server IP】 IP address for FTP server 【Port】 Domain Port of FTP,default 21 【User Name】User name of FTP 【Password】Password of user 【Anonymous】 ：enable anonymous,no need setting user name and password 【Max File Length】Max length for upload files at every packed,default 128M 【Dir Name】...
  • Page 57 [Type] choose "DNS" [Enable]: ■ means it is chosen [Sever IP]: IP address of DDNS server [Port]: Port No. of device, related DDNS server listen port [User name] the user name that device can log in DDNS server [Password] the password related to the user name. [Refresh cycle]：Time interval between device and DDNS when chynchronously.
  • Page 58 Picture 4.31 Wireless Config 【Enable】Choose Enable to make all settings available 【Type】Dial type,default AUTO 【Wireless AP】3G access point 【Dial Number】3G Dial Number 【User Name】User name of 3G 【Password】Password of dial user 【IP Address】IP address,got from dial Note：some DVRs don't support this function. 【Mobile Monitor Setup】...
  • Page 59 【UPNP】 UPNP protocol is to realize auto port forwarding on router, precondition of using this function is to make sure the UPNP function of router is enabled. Picture 4.33 UPNP 【Enable】Choose Enable to make sure all UPNP settings available 【HTTP】Route will automatically distribute HTTP port for the device,when IE viewing,it need this port 【TCP】Router will automatically distribute TCP port for the device,when monitoring via CMS,it need this port.
  • Page 60 Pic 4.34 WIFI configure 【Search】 ：click【search】to search all the available wireless device in current range. 【enable】 ：tick it to enable firstly, then go for further setting. 【auto obtain IP address】 ：tick it to enable, device will auto obtain a WIFI IP. 【SSID】...
  • Page 61 4.4.5 GUI Display Configure the video output parameters including the front output mode and encode output mode. Front output：In the local preview mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover. Encode output：In the network surveillance and video file mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover.
  • Page 62 【Channel Title】Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters and 25 letters are supportive. 【 Time Display 】 means the selective state. Display the system data and time in the surveillance window.
  • Page 63 4.4.6 PTZ device /RS485 device * when under hybrid mode/full digital mode, it shows with PTZ device and RS485 device, Pic 4.37 PTZ configure 【Channel】Choose the dome camera input channel. 【Protocol】Choose the corresponding dome protocol. (PELCOD as an example) 【 Address 】 Set as the corresponding dome address. Default: 1. （ Note ： The address must be consistent with the dome address.）...
  • Page 64 4.38 RS485 device 【Protocol】choose related protocol of brand model( for example: DaHua)； 【Address】set with corresponding address, default is 1； 【Baud rate】choose bard rate that related device use, default is 115200； 【Data bits】including 5-8 options，default is 8； 【Stop bits】including 2 options, default is 1； 【Parity】Include odd check, even check, sign check, blank check.
  • Page 65 【Serial Port Function】Common serial port is used to debug and update program or set up specific serial port. 【Baud rate】Choose the corresponding baud rate length. 【Data bits】Include 5-8 options. 【Stop bits】Include 2 options. 【Parity】Include odd, even, mark, space, default is none. 4.4.8 Tour Set the patrol display.
  • Page 66 【interval】Set the patrol switch interval. The set range is 5-120 seconds. 【alarm tour】set the interval to shift alarm tour, range is 5-120 seconds, choose return when alarm ends, when alarm link to tour, system will auto shift to six-view after alarm finished. Remark：...
  • Page 67 Channel manage page under all analog(DVR) mode Channel manage page under Hybrid(HVR) mode / full digital(NVR) mode Pic 4.42 channel manage interface...
  • Page 68 Digital channel: Single link page of digital channel Multi-linkage page of Digital channel Pic 4.43 digital channel interface 【Channel】select channel title 【Enable】Open digital channel, tick enable, then can do related settings 【Time Synchronization】Tick it means the time of this channel and device is the same. 【Connection Mode】can be singe connect or multi-ink, multi-link modes can connect to several devices, device will be tour displayed one by one, tour interval can be set, no less then 10s;...
  • Page 69 Pic 4.44 remote channel configure page 【Configure Name】device is with default configure title, user can revise it if necessary； 【Device Type】3 types: IPC、DVR、HVR，user can choose as what you like, default is IPC； 【Protocol】Default is TCP 【 Remote channel 】 User can input remote channel title from the device that you want to connect remotely 【Stream】Default is main stream, do not support extra-stream at present；...
  • Page 70 Channel Status: channel status is to show the status of all the digital channel When there is what existing, status including Max Resolution, This Resolution, Connection Status. For example: The channel status for 4+2 mode is as below: When a channel is added with device but it is not enable, you will see as below: Channel status interface under full digital(NVR) mode (One of the channel without device)
  • Page 71 Remark: when the current resolution is over the max resolution that the channel supported, then a red “X” will be shown on the preview image, for example: Under full digital channel mode, Max resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as 960H), you will see below pic: Channel mode: Remark: this series of product with full analog channel mode, hybrid mode and full digital mode,...

  • Page 72: Advanced

    4.5 Advanced Manage tools menu including: HDD manage, account manage, online user, output adjust, auto maintain, upgrade. 4.5.1 HDD Manage Configure and manage the hard disk. The menu displays current hard disk information: hard disk number, input port, type, status and overall capability. The operation include: setup the write-read disk, read-only disk, redundant disk, hard disk format, resume default.
  • Page 73 2. There is no limit in the user and user group. You can add or delete the user group according to user definition. The factory setup include: user\admin. You can set the team as you wish. The user can appoint the purview in the group. 3.
  • Page 74 【Add user】Add a user in the group and set the user purview. Enter the menu interface and input the user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time. Once choose the team the user purview is the subclass of the team.
  • Page 75 【Delete User】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button. Pic 4.51 Delete Group 4.5.3 Online user To check the information of network user that connected with local device, also can tick the selected user to break up connection,（make √...
  • Page 76 4.5.4 TV adjust Refer to chapter 3.5.7 . 4.5.5 Auto Maintain The user can set the time to auto reboot and auto delete file. Picture 4.39 Auto maintain 4.5.6 Restore The system restore to the default . You can choose the items according to the menu. Pic 4.54 restore to default...
  • Page 77 4.5.7 Upgrade Upgrade Pic 4.55 【Upgrade】choose USB interface. 【Upgrade file】choose the upgrade file. 4.5.8 Device Info Provide device interface info like audio in,alarm in/out to be conveniently used for user. Pic 4.56 device info 4.5.9 Import / Export Users can export the log info and the configure file from device to connected flash stick, and also can import related configure file from flash stick to settings, which greatly bring convenience to the customers.

  • Page 78: Info

    4.57 Import / Export interface 4.6 Info Display the hard disk information, including HDD info, code stream statistic, log info, version info 4.6.1 HDD info Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on.
  • Page 79 Pic 4.58 HDD info Tips：○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks,then install a new one.

  • Page 80: Shut Down System Refer To Chapter 3.5.8

    Pic: 4.60 Log information 4.6.4 Version Display the basic information such as hardware information, software version, issue date, serial number , NAT status and so on. Pic 4.61 version information 4.7 Shut down system Refer to chapter 3.5.8.

  • Page 81: Faq And Maintenance

    5 FAQ and maintenance 6.1 FAQ If the problems are not listed, please contact the local service or call the HQ service. We are willing to offer the service. 1、 The DVR can not boot up normally. Possible reasons are as followed: The power supply is not correct.
  • Page 82 4、 There are no video outputs in single channel, multiple channels and all channels. Possible reasons are as followed: The program is not matched. Please update the program. The image brightness is all 0. Please restore the default setup. There is no video input signal or the signal is too weak. The channel protection or the screen protection is set.
  • Page 83 Possible reasons are as followed: It is not an active tone arm. It is not an active sound box. The audio lines are damaged. The hardware of the DVR is damaged. 9、 There is audio signal in the surveillance window but mo audio signal in the playback state.
  • Page 84 The motion detect area set is not correct. The sensitivity is too low. Limited by some hardware edition. 13、 I can not login via web or CMS. Possible reasons are as followed: The system is windows 98 or win me. We recommend updating to windows 2000sp4 or higher Version or installing the software for low edition.
  • Page 85 The rewritable machine and the hard disk are shared the same data lines. The data is too much. Please stop recording and backup. The data exceeds the backup storage. The backup equipment is not compatible. The backup equipment is damaged. 17、...
  • Page 86 21、 The storage time is not enough. Possible reasons are as followed: Front vidicon quality is bad. The lens is too dirty. The vidicon is in backlighting installation. The hard disk capability is not enough. The hard disk is damaged. 22、...

  • Page 87: Maintenance

    26、 The snapshot at alarm function was enable, why not catch picture Possible reasons are as followed: 1 HDD manage without partition for snapshot. 2 Partition for snapshot is 0 3 The snapshot function is not enable on record-> storage of related channel. 27、...

  • Page 88: Appendix 1.Remote Controller Operation

    Appendix 1.Remote controller operation Serial Name Function number Multi-window Same function as Multi-window button in the front button panel Numeric button Code input/number input/channel switch 【Esc】 Same function as【Esc】button in the front panel Direction button Same function as direction button in the front panel Record control Control the record Same function as “Record mode”...

  • Page 89: Appendix 2.Mouse Operation

    Appendix 2.Mouse operation *Take right hand as an example The mouse in USB connection is supported. Operation Function Double click one item in the file list to playback the video Double click the playback video to zoom in or out the Double left click screen Double click the channel to make it full screen display...

This manual is also suitable for:

Dvr-x80vDvr-x81vDvr-x80vhDvr-x81vhDvr-hx8x

Table of Contents