Advertisement

Quick Links

DVR-HA401S
Digital Video Recorder
Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVR-HA401S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for XtendLan DVR-HA401S

  • Page 1 DVR-HA401S Digital Video Recorder Manual...
  • Page 2 WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ―dangerous voltage‖...
  • Page 3 IMPORTANT SAFECUARDS 1. Read Instructions 13. Damage requiring Service Unplug this equipment from the wall outlet and refer servicing to All the safety and operating instructions should be read before the qualified service personnel under the following conditions: appliance is operated. A.
  • Page 4: Table Of Contents

    INDEX 1. SAFETY CAUTIONS - - - - -- - - -- - -- - - - --- - - - -- - - -- - -- - - ---- - - - -- - - - - 1.1 Power Source ------- - ------ --- -------- ---- ---- - ------ - ---- - - - - 1.2 Installation ---------------------------------------------------------...
  • Page 5 INDEX 5.2 CAMERA SETUP ----------------------------------------------------- 5.2.1 CAMERA ------------------------------------------------------- 3.2.2 PTZ ----------------------------------------------------------- 5.2.3 SPOT ---------------------------------------------------------- 5.2.4 SEQUENCE ----------------------------------------------------- 5.2.5 PRIVATE ZONE -------------------------------------------------- 5.3 EVENT SETUP ------- 5.3.1 MOTION ------- 5.3.2 ALARM IN ------- 5.3.3 VIDEO LOSS ---- 5.3.4 SYSTEM ------- 5.3.5 DISPLAY ------- 5.4 RECORD SETUP ----------------------------------------------------...
  • Page 6 INDEX 6. SEARCH ------------------------------------------------------------- 6.1 Search Screen ------------------------------------------------------- 6.1.1 Search Menu ---------------------------------------------------- 6.1.2 Quick Search ---------------------------------------------------- 6.1.3 Event Search ---------------------------------------------------- 6.1.4 Overlapped List -------------------------------------------------- 6.1.5 Panorama Search ------------------------------------------------ 6.1.6 Smart Search ---------------------------------------------------- 6.1.7 Section Repeat Search --------------------------------------------- 7. BACKUP ------------------------------------------------------------- 7.1 Play with backup data ------------------------------------------------ 8.
  • Page 7: Safety Cautions

    1. SAFETY CAUTIONS ※ Follow these instructions to keep the user safe and prevent property damage. Read them carefully before the use of the product. The responsibility falls on the user to install and use the product properly. 1.2 Installation-related 1.1 Power Source-related ①...
  • Page 8: Cleaning And Usage

    1.3 Cleaning and Usage-related ① U n p l u g t h e p o w e r p l u g d u r i n g l i g h t n i n g , ⑥ When cleaning the product, unplug the power thunderstorm or when not in use for long periods cord and gently wipe using a soft cloth.
  • Page 9: Outline

    2. OUTLINE 2.1 Functions This DVR provide Full HD Display and Playback. • Based on Private Development ASIC Technology and Linux OS. • Pentaplex Operation Performance (Live, Recording, Playback, Backup, Network) • 16CH / 8CH / 4CH HD-SDI Video input. •...
  • Page 10: System Organization

    2.2 System Organization HD-SDI CAMERA HDMI PTZ KEYBOARD MONITOR Video Network input SPOT Video out MONITOR Audio Input Alarm Sensors Audio Input Output SIREN SENSOR SPEAKER...
  • Page 11: Dvr Organization

    3. DVR ORGANIZATION 3.1 Front Panel Description NOTE: Turn on the DVR after connecting the power cord, camera input and monitor completely ▪ DVR-HAx Direction Function Buttons USB Port Status LED Remote Number button controller IR ▪ DVR-HBx Display/Recording Menu/ESC Direction Key ▲...
  • Page 12 ※ STATUS LED Recording LED Recording LED is turned on when DVR is recording. Network LED Network LED is turned on when DVR is connected by network ※ Front Button The front panel of DVR is similar as normal VCR or Multiplexer and the functions are also similar . Front buttons have various functions and are used for DVR initial setting and others.
  • Page 13 BACKUP button (Zoom) Enter Backup menu. Return to previous screen if this button is pressed again. In PTZ mode, it is used Zoom function button. SEARCH button (Focus) Enter Search menu. The password is required for search. Return to previous screen if this button is pressed again. In PTZ menu, it is used Focus function button.
  • Page 14: Real Panel

    3.2 Real Panel ▪ DVR-HAx Power On/off Network RS-232 VGA out Switch 1 HDMI Main out RS-485 for BNC Spot out 1 e-SATA 1 HDMI Spot out PTZ Camera 16 Audio in HD-SDI Camera 16 Sensor Input 2 Alarm out 1 Audio out Input...
  • Page 15 3.2 Real Panel ▪ DVR-HBx Power On/off Network VGA out RS-232 Switch RS-485 for 4 Audio in HDMI out 1 Alarm out PTZ Camera 1 Audio out HD-SDI Camera 4 Sensor Input Input...
  • Page 16: Remote Controller

    3.3 Remote Controller RECORD DISPLAY ROTATE MENU LOCK(LOG-OUT)/ REPEAT NUMBER ▲ Direction Key /Panorama Play ◀ Direction Key / ENTER Reverse Play ▶ Direction Key / Play Fast Reverse Play/ ▼ Direction Key /Smart Play PAUSE Fast Forward Play / PLAY BACKUP SEARCH PTZ ZOOM...
  • Page 17: Live

    4. LIVE 4.1 Live Screen Execution Information Message Camera Name Record Status Icon Live Screen PTZ Control Information Screen Expand/Reduction Backup Progress Window Status(%) Current Date and Current Channel Current Event Information Time Information Icon Icon Sequence Icon - Record Icon (Red) - Video-loss Icon When record in live screen.
  • Page 18: Top Menu

    4.1.1 Top Menu In live screen, if ▲ button of the remote controller or front panel is pressed, or if the mouse cursor is placed over the end of the top area, the top menu is appeared. Search Backup Status Setup Log-out 4.1.2 Bottom Menu...
  • Page 19: Cameo Menu

    4.1.3 CAMEO Menu In live screen, if the ENTER button of the remote controller or front panel is pressed, a blue square cursor will be appeared. If the ENTER button is pressed again, the CAMERA menu will be appeared. ▪ ADJUSTMENT : Adjust the selected camera color setting. ▪...
  • Page 20 ▪ PTZ : PTZ Camera should be installed otherwise the PTZ menu is not activated. The following picture will be appeared when select PTZ menu. ※ Using Mouse : On the above menu, when click the right button of mouse, the control screen for Menu, Zoom, Focus and Iris will be appeared.
  • Page 21 - SPEED SETUP : Set the PTZ camera speed. ( 1 to 8) NOTE: If the mouse is used to move the PTZ camera, the movement speed depends on the position of the mouse. As the mouse pointer moves away from the center, speed becomes faster. - PRESET SETUP : Set the preset position.
  • Page 22: Setup

    5. SETUP In this category, there are General, Camera, Event, Schedule, Ethernet and System Information. On the Top menu, select the [SETUP] menu. After select the menu, the following Log-in window will be appeared. Enter the password by the key buttons and press the ENTER button.
  • Page 23: General

    5.1.1 GENERAL [SYSTEM] ▪ LANGUAGE : Select the language. (English, Germany, French, Spanish, Japanese, Chinese, Italian, Russian, Dutch and Korean) ▪ KEY TONE : Turn on/off the buzzer sound of key. ▪ UNIT ADDRESS : Set the DVR ID. This ID can be used when use multi DVR in same place by one remote controller. ▪...
  • Page 24 5.1.1 GENERAL [DATE / TIME] ▪ DATE FROMAT : Select the data format. (YY/MM/DD) / (MM/DD/YY) / (DD/MM/YY) ▪ TIMEZONE : Select the timezone and DST. The city which don’t use DST is set to [OFF] automatically. ▪ DATE DISPLAY : Display date on live screen or not. ▪...
  • Page 25: Alarm Out

    5.1.2 ALARM OUT ▪ SIGNAL : Select on/off to use alarm by channel. ▪ ALARM SET TEST : Check the alarm connection whether it works properly or not. Press the [SET] button then alarm device will be operated. ▪ ALARM CLEAR TEST : Press the [CLEAR] button then alarm device will not be operated. 5.1.3 DISK ※...
  • Page 26 5.1.3 DISK [CHECK / USB] ▪ EARLIEST RECORD : Display the earliest recorded data information. ▪ LATEST RECORD : Display the latest recorded data information. ▪ DISK CHECK : Check the data from the earliest recorded to the latest recorded. ▪...
  • Page 27 [RAID] ※ This function will be added. ▪ RAID SETUP : Select the RAID level (RAID0, RAID1 and RAID5). ▪ RAID : Display RAID on/off status. ▪ DISK STATUS : Display disk status. ▪ RAID STATUS : Display RAID status. ▪...
  • Page 28 When setup the RAID, above message will be appeared. After select the “V” mark, DVR will be rebooted. ※ Rebooting for RAID, booting time is longer than normal. (About 5 minutes) !WARNING ※ When RAID is built, all data of HDD will be deleted. ※...
  • Page 29 ※ RAID 0 ▪ For building RAID Level 0, it will take about 5 minutes. ▪ Displayed with [GOOD], if the building is finished without any problem ※ RAID 1 ▪ For building RAID Level 1, building time depends on the HDD capacity. (In case of 1TB HDD, it will take 24~48 hours) ▪...
  • Page 30 ※ RAID 5 ▪ For building RAID Level 1, building time depends on the HDD capacity. (In case of 1TB HDD, it will take 24~48 hours) ▪ Check the status on [RAID STATUS] and [RATE].
  • Page 31: Monitor

    5.1.4 MONITOR ▪ HDMI : Select the HDMI resolution for connected monitor. ▪ FILTER : Select On/Off for image filtering. ▪ BORDER COLOR : Change the border color. ▪ ALPHA BLENDING : Set the transparency of menu. (Set 1 to 20 and 20 is closer to the more transparent.) ▪...
  • Page 32: Accout

    5.1.5 ACCOUNT ※ Add / delete any user and give permission freely. ※ W hen add new user, have to input new password. When delete use, confirm again. NOTE: ( Default ADMIN password is 1111 ), Initial user name can be modified but can not delete. CAUTION: Default Admin account must not be deleted before add new user.
  • Page 33: Config

    5.1.6 CONFIG ▪ SLOT : Select the slot to load or save on DVR memory. ※ DEFAULT : Change factory default setting. ▪ DATE : Display the latest saved date. ▪ LOAD : Load the saved data. ▪ SAVE : Save the set data. ▪...
  • Page 34: Shutdown

    5.1.7 SHUTDOWN ▪ RESTART : Restart the DVR. ▪ SHUTDOWN : Shutdown the DVR.
  • Page 35: Camera Setup

    5.2 CAMERA SETUP In this category, there are Camera, PTZ, Spot, Sequence and Private Zone setting. Select the [CAMERA] Menu. 5.2.1 CAMERA ▪ CAMERA LABEL : Select the camera label of live screen. (ALL / NUMBER / NAME / OFF) ▪...
  • Page 36: Ptz

    5.2.1 CAMERA If select the camera name, the virtual keyboard will be appeared. Max camera name should be less than 11 character. [Virtual Keyboard] 5.2.2 PTZ [PTZ] ▪ PORT : Select the Baud Rate for using PTZ camera. ▪ ID : Select the ID for using PTZ camera. ▪...
  • Page 37: Spot

    5.2.3 SPOT CAMERA : Select the camera for display on spot monitor. DEFAULT : Select the camera for display on spot monitor when sequence is off. SEQUENCE : Select On/Off for sequence screen. INTERVAL : Select the interval time to move next channel. The max value is 256 sec. POPUP : Select On/Off for pop-up screen when event is occurred.
  • Page 38: Sequence

    5.2.4 SEQUENCE PAGE DWELL TIME : Select the dwell time to move next channel. CAMEO DWELL TIME : Select the dwell time for CAMEO sequence. NOTE: CAMEO sequence means selected camera is rotated in select cameo of division screen. Camera image which is shown on the other CAMEO of division screen is not included in CAMEO sequence.
  • Page 39: Private Zone

    5.2.5 PRIVATE ZONE ▪ ZONE ENABLE : Select On/Off to use. (LIVE mode/ SEARCH mode) ▪ ZONE COLOR : Select the color to hide. ▪ ZONE : Select the zone to hide. (W hen select the ZONE button, the camera image will be appeared. NOTE : Move the blue dot to a desired location and press the OK button.
  • Page 40: Event Setup

    5.3 EVENT SETUP In this menu, there are Motion, Alarm in, Video Loss, System and Display setup. Select the [EVENT] menu. 5.3.1 MOTION [INPUT] ▪ ACTIVE : Select On/Off to activate motion. ▪ LEVEL : Select the sensitive for motion trigger. (Select 1 to 5 level) ▪...
  • Page 41 ▪ AREA SETUP In the Area setup, the Red square is shown at the top left side of the screen. If select the OK button, the dot color will be changed to Green. A motion area can be selected by the direction buttons. NOTE : When the status is Red square, can move any direction to select.
  • Page 42 [ACTION] ▪ RECORD : Select the channel for record. ▪ ALARM : Select On/Off for alarm. ▪ BUZZER : Select On/Off for buzzer. ▪ PRESET : Set the preset number. (W hen motion is triggered, the PTZ camera move to the set preset number position) ▪...
  • Page 43: Alarm In

    5.3.2 ALARM IN TIP: If select the ACTIVE+ / TYPE+ menu, can change all setting at once. [INPUT] ▪ ACTIVE : Select On/Off to activate alarm. ▪ NAME : Type any name. ▪ TYPE : Select the alarm type. (NO : Normal Open / NC : Normal Close) [ACTION] ▪...
  • Page 44: Video Loss

    5.3.3 VIDEO LOSS TIP: If select the ACTIVE+ menu, can change all setting at once. [INPUT] ▪ ACTIVE : Select On/Off to activate. [ACTION] ▪ RECORD : Select On/Off for record. ▪ ALARM : Select On/Off for alarm. ▪ BUZZER : Select On/Off for buzzer. ▪...
  • Page 45: System

    5.3.4 SYSTEM [SMART] ▪ SMART WARNING : Select the option for smart warning. (POPUP + BUZZER / POPUP / OFF) ▪ CHECK INTERVAL : Select the check interval time. (Select 1 hour to 24 hour) ▪ TEMP. THRESH : Select the warning temperature. (C: 0 to 100 / F : 32 to 212) ▪...
  • Page 46: Display

    5.3.5 DISPLAY ▪ DISPLAY : Select display time by second. (Select 0 to 100) ▪ EVENT MESSAGE : Select On/Off to display event message. ▪ EVENT POPUP : Select On/Off to pop-up.
  • Page 47: Record Setup

    5.4 RECORD SETUP In this menu, there are Resolution, Schedule, Record, Audio, Manual, Filter setup. Select the [RECORD] menu. 5.4.1 SCHEDULE ▪ SETUP MODE : Select the record schedule. (TYPICAL / CUSTOM) [TYPICAL] ▪ DAY TIME : Select the day time. (The night time is changed automatically according to the day time zone) ▪...
  • Page 48 [CUSTOM] ▪ Set 3 different recording setup by day and time. (REC0, REC1, REC2) This is related with [RECORD] menu so [CUSTOM] mode should be matched with [RECORD] menu. TIP : For REC0, REC1, REC2 recording, change the setting [SETUP MODE] to [TYPICAL] and enter to the [RECORD] menu then change the setting.
  • Page 49: Record

    5.4.2 RECORD [DAY] / [NIGHT] / [WEEKEND] ▪ TIME : Set the recording frame and resolution by channel. ▪ EVENT : Set the event recording. (Frame / Resolution / Post recording time [5 to 100 second]) TIP : The frame can be set by the direction button in setup screen. If set to [CUSTOM] in [SCHEDULE] menu, the DAY / NIGHT / W EEKEND menu will be changed to REC0/ REC1 / REC2.
  • Page 50: Event

    5.4.3 EVENT ▪ EVENT : Select the Pre recording time and Post recording time. TIP: If select the RECORD+ menu, can change all setting at once. 5.4.4 AUDIO ▪ AUDIO : Select On/Off for audio recording by each channel.
  • Page 51: Manual

    5.4.5 MANUAL Manual Recording is same as Panic recording. This function can be worked by the [REC] button on Remote controller or Front panel. ▪ SPEED : Select the recording frame by each channel. ▪ Quality : Select the resolution by each channel. ▪...
  • Page 52: Ethernet Setup

    5.5 ETHERNET SETUP In this menu, there are Network, Serial, DDNS, E-mail setup. Select the [ETHERNET] menu. 5.5.1 NETWORK [ETHERNET] ▪ DYNAMIC IP : Select On/Off for dynamic IP. If Dynamic IP is OFF, DVR get IP address from router automatically. ▪...
  • Page 53 [ETHERNET2] ▪ DYNAMIC IP : Set to OFF. ▪ IP ADDRESS : Input the IP address that it should be same network class. ▪ SUBNET MASK : Input the subnet mask. ※ NOTICE ※ IP Address should be inputted same IP class as IP camera. EX) If IP camera address is 192.168.0.1 ~ 4, IP address of ETHERNET2 should be 192.168.0.xxx...
  • Page 54 5.5.1 NETWORK [CLIENT] ▪ CLIENT ACCESS : Select client access options. ( ALL / RANGE ) ▪ BEGIN ADDRESS / END ADDRESS (W hen select RANGE option, type the IP address to accept) : Input the acceptable IP address. ▪ SMS PORT (TCP) : Select SMS port. ▪...
  • Page 55: Serial

    5.5.2 SERIAL [RS-232 INPUT SETUP] ▪ SERIAL TYPE : Select external device. ▪ MODEL : Select the protocol to use. ▪ PORT : Select the Baud Rate / DATA bit / Parity / Stop Bit. [RS-485 INPUT SETUP] ▪ SERIAL TYPE : Select external device. ▪...
  • Page 56: Ddns

    5.5.3 DDNS ▪ DDNS SERVER : Select DDNS server. (Ddnsdvr.com / Dyndns.com / ChangeIP.com) ▪ HOST NAME : Input the host name from the registered on DDNS server. ▪ USER NAME : Input the user name from the registered on DDNS server. ▪...
  • Page 57: E-Mail

    5.5.4 E-MAIL [ADDRESS] ▪ SEND E-MAIL : Select On/Off for use. ▪ SCHEDULE : Set the usage time. (From : Start time / To : End time) ▪ E-MAIL ADDRESS : Input the E-mail address to receive. [SERVER] ▪ MAIL SERVER : Select the mail server. (SMTP server / DVR System) ▪...
  • Page 58: System Setup

    5.6 SYSTEM SETUP In this menu, there are System Log, Status, Version. Select the [SYSTEM] menu. 5.6.1 SYSTEM LOG ▪ Check the system log by the left, right direction button.
  • Page 59: Status

    5.6.2 STATUS [DISK] ▪ Display HDD Status. ▪ CHECK SMART NOW : Check the smart. ▪ SMART INFORMATION : Show the smart information. [RECORD] ▪ Display RECORD Status.
  • Page 60: Version

    5.6.2 STATUS [AUDIO] ▪ Display AUDIO Status. 5.6.3 VERSION ▪ Display DVR version and information.
  • Page 61: Search

    6. SEARCH On the Top menu, select the [SEARCH] menu. After select the menu, the following Log-in window will be appeared. Enter the password by the key buttons and press the ENTER button. (The default password : 1111) ▪ QUICK SEARCH : For quick search of records ▪...
  • Page 62: Search Screen

    6.1 Search Screen Configuration Execution Information Message Camera Name Search Information Icon Search Icon Search Screen Repeat Time Information Screen Expand/Reduction Window Backup Progress (%) Recorded Audio Search Date/Time Information Icon 6.1.1 Search Menu When mouse cursor is placed over on the bottom side, the Search menu is appeared. Division Screen Play 1 frame backward Fast forward play...
  • Page 63: Quick Search

    6.1.2 CALENDAR SEARCH a. Select the data by the direction button. - Recorded data is displayed the orange color. b. Select the time by the direction button. - After select hour, minutes will be appeared. NOTE: The time graph color is different by the recording mode. Continuous Recording = Blue, Audio Recording = Light Blue, Event Recording = Red.
  • Page 64: Event Search

    6.1.3 EVENT SEARCH ▪ DATA : Select Date to search. ▪ MOTION : Select On/Off event for search. ▪ ALARM IN : Select On/Off event for search. ▪ VIDEO LOSS : Select On/Off event for search. ▪ SELECT CAMERA : Select the camera for search. ▪...
  • Page 65: Overlapped List

    6.1.4 OVERLAPPED LIST ▪ If user change the time or applied DST (Daylight Saving Time), there will be overlapped data. ▪ After select the list, if select the [PLAY] button, can search [QUICK SEARCH] or [EVENT SEARCH].
  • Page 66: Panorama Search

    6.1.5 PANORAMA SEARCH ▪ During normal search, press the [PANORAMA] button. ▪ By mouse, click the right mouse button and click the [PANORAMA] Search. ▪ Playback with frame by frame. 6.1.6 SMART SEARCH ▪ During normal search, press the [SMART] button. ▪...
  • Page 67: Section Repeat Search

    6.1.7 SECTION REPEAT SEARCH ▪ During normal search, press the [LOCK] button. When press one time, the start position is set, press one more time, the end position is set. ▪ By mouse, click the below red circle button. ▪ Only playback the set section repeatedly. ▪...
  • Page 68 ※ Button Explanation in Search mode ▪ Remote Controller or Front button Button Explanation SEARCH Display the [SEARCH] menu. Cancel the Search mode or return to the live screen. ENTER Select the CAMEO menu. FAST REVERSE When reverse play, up and down play speed. FAST FORWARD When forward play, up and down play speed.
  • Page 69: Backup

    7. BACKUP On the Top menu, select the [BACKUP] menu. After select the menu, the following Log-in window will be appeared. Enter the password by the key buttons and press the ENTER button. (The default password : 1111) ▪ TARGET : Select the device to backup. (USB / DVD) ▪...
  • Page 70: Play With Backup Data

    7.1 Play with backup data ▪ After backup, the DVR Player is copied with data. ▪ Backup data only can be played on DVR Player at PC. ▪ Can export to JPEG still shot.
  • Page 71: Appendix

    8. APPENDIX 8.1 Firmware Upgrade Memory Stick ① Copy the firmware on USB and connect on the USBA (Up) port. ※ The USB should be connected on USB A (Up) port otherwise can not upgrade. ② For upgrade, restart the DVR. ③...
  • Page 72: Web Client

    8. APPENDIX 8.2 Web Client ※How to connect For using web connection through internet, 7000 and 80 ports should be set as port forwarding at the Router. 1. To connect Web viewer, the [Ethernet] setup on DVR is required firstly. 2.
  • Page 73: Web Viewer Functions

    8.2.1 Web viewer Functions Division screen ① ② ③ ④ Connect Disconnect Control ① ② Zoom In Brightness control Contrast control Zoom Out ③ ④ SEARCH ALARM Open data Exit Search...
  • Page 74: Trouble Shooting

    8. APPENDIX 8.3 Trouble Shooting SYMPTOM MEASURES If the power LED is not lighted, check the below items. No Power - Check the power plug and outlet. (Refer to the [Cautions for safety] - Connect the power cord to the power connector of DVR properly. - Connect the camera cable to the DVR port properly.
  • Page 75 - Check the battery polarity. - Check the remote controller ID. (Refer to the [Remote Controller Configuration]) Not work remote controller - Focus on the remote controller to the IR sensor. - Use the remote controller within 7 meters from DVR. - Change the battery.

Table of Contents