Rear Cushion - Sym MAXSYM 400i Service Manual

16. Rear Wheel / Rear Fork / Rear Cushion
Install the bearing lock cir clip.

Rear Cushion

Removal
Remove the luggage box, rear carrier and body
covers.
Loosen the mounting bolts of the air cleaner (2
bolts).
Remove the exhaust muffler (3 bolts, 2 nuts).
Remove the under bolts by left and right rear
cushions.
Remove the upper bolts by left and right rear
cushions, and then remove the cushion.
Installation
Install in reverse order of removal procedures.
Caution
 The rear cushion must be replaced as a unit.
Never disassemble the rear cushion as that
would damage the structure.
Torque Value
Rear cushion upper bolt: 3.5~4.5kgf-m
Rear cushion under bolt: 2.4~3.0kgf-m
16-6
To this chapter contents
Left
Right
Outside collar
Under bolt
Cir clip
Bearing
(6303UU)
Inside collar
Upper bolt
Upper bolt
Under bolt