Adding Brake Fluid - Sym MAXSYM 400i Service Manual

Adding Brake Fluid

Before the brake fluid reservoir is removed, turn
the handle so that the brake fluid reservoir
becomes horizontal, and then remove the brake
fluid reservoir.
When maintain the brake system, it is supposed
to cover the surface of rubber parts by rags.
Caution
Please do not refill the brake fluid over upper
limit. Overflow may result in damages on painted
surface such as rubber or plastic parts.
Remove the master cylinder cap and diaphragm.
Fill high quality brake fluid with same brand into
master cylinder.
Clean the dirty brake disk.
Caution
 Dirty brake lining or disk will reduce the brake
performance.
 Mix incompatible brake fluid will reduce brake
performance.
 Other substance will block the brake fluid
system, and lead to reduce the brake
performance or lose brake ability completely.
To this chapter contents
Rear brake master cylinder
14. Brake System
Front brake master cylinder
Master cylinder cap
Diaphragm
Upper level
Brake
Fluid
14-5