Weighing Your Motor Home; Weight Labels - Jayco Greyhawk 2015 Manual

SECTION 3 - PRE-TRAVEL INFORMATION
T P
RAILER LUG
If you choose to tow behind your RV, a chassis manufacturer supplied 7-way
trailer plug (located at the hitch) is pre-wired into your motor home. Wiring to
operate your towed vehicle brakes must be the same size in both the towed
vehicle and the motor home.
White 1
Blue 2
Green 3
Black 4
Red 5
Brown 6
Yellow 7
Maintenance
The connector plug may build up corrosion with extended use and should be
cleaned periodically to insure good electrical contact. Make sure the connector
plug is kept clean and protected from road elements as you travel.
W L
EIGHT ABELS
The factory-installed weight labels are specific to the recreation vehicle for
which they are supplied and are not interchangeable
Vehicle weight labels are posted on Jayco manufactured RVs so you can make an
informed decision before your purchase. Do not remove these labels from your
RV. If the labels are missing, contact your dealer or Jayco Customer Service for
replacements
Fig. 3.3 Federal Certification label
W Y
EIGHING OUR
Now that your RV is loaded you should have it weighed. The actual weight of the
RV, passengers, all options, liquids, the hitch weight of your towed vehicle and
your personal cargo is important for you to know so you do not exceed the GVWR.
There are two important factors when loading your RV: total weight and balance.
3-4
Ground
Brakes
Running lights
House batteries charge line
Stop & left turn
Stop & right turn
Back up
M H
OTOR OME
WARNING
Fig 3.4 Motor home Weight
CLASS C MOTORHOME
Fig. 3.2
7-way trailer plug
Car end, rear view
.
Information label