4-3-15 Disk S, T Reel Removal
1) Lift the Disk S, T Reel Œ, ´.
Œ DISK S REEL
Fig. 4-22 Disk S, T Reel Removal
Toshiba
4-3-16 Holder Clutch Ass'y Removal
1) Remove the Washer Slit Œ.
2) Lift the Holder Clutch Ass'y ´.
Note : When you reinstall Holder Clutch Ass'y ´.
1) Check the condition of spring as shown in
´ DISK T REEL
2) Don't push Holder Clutch Ass'y down with exces-
detail A.
sive force. Just insert Holder Clutch Ass'y into post
center with dead force and rotate it smoothly.
Be sure to confirm that spring is in the slit of
Gear Center Ass'y as shown in detail B.
DETAIL A
SPRING
<BAD>
DETAIL B
SPRING
<BAD>
Fig. 4-23 Holder Clutch Ass'y Removal
Disassembly and Reassembly
Œ WASHER SLIT
´ HOLDER CLUTCH ASS'Y
<GOOD>
<GOOD>
4-13