Table of Contents
Advertisement
4-3-3 Holder FL Cassette Ass'y Removal
1) Remove the Lever FL Door. (Refer to Fig. 4-9)
2) Pull the Holder FL Cassette Ass'y Πto the eject
position.
3) Pull the Holder FL Cassette Ass'y Πas grasping
the Holder FL Cassette Ass'y Πand Lever FL
Cassette-R ´ in the same time to release hooking
from Main Base until the Boss [A], [B] of Holder
FL Cassette Ass'y Πis taken out from the Rail [C],
[D].
4) Lift the Holder FL Cassette Ass'y Πin the direc-
tion of arrow "B" in this time, you have to grasp
the Lever FL Cassette-R ´ continuously until the
Holder FL Cassette Ass'y Πis taken out completely.
Note : Be sure to insert Lever FL Cassette-R ´ in the
direction of "A" to prevent seperation and breakage
of the Lever FL Cassette-R ´ at disassembling and
reassembling.
"B"
ΠHOLDER FL
CASSETTE ASS'Y
BOSS [A]
Fig. 4-10 Holder FL Cassette Ass'y Removal
Toshiba
BOSS [B]
RAIL [C]
RAIL [D]
´ LEVER FL CASSETTE-R
"A"
4-3-4 Lever FL Arm Ass'y Removal
1) Remove the Lever FL Door. (Refer to Fig. 4-9)
2) Remove the Holder FL Cassette Ass'y.
(Refer to Fig. 4-10)
3) Release the Hook Πin the direction of arreow
"A", pull out the Lever FL Arm Ass'y ¨ from the
Boss of Main Base.
4) Remove the Lever FL Arm Ass'y ¨ in the direc-
tion of arrow "B".
Assembly : When reinstalling, be sure to reassemble
Lever FL Arm Ass'y ¨ after you insert the Boss ´ in
Groove [A] of Slider FL Drive ˇ.
ΠHOOK
"A"
"B"
¨ LEVER FL ARM
ASS'Y
Fig. 4-11 Lever FL Arm Ass'y Removal
Disassembly and Reassembly
GROOVE [A]
´ BOSS
ˇ SLIDER FL DRIVE
4-7
Advertisement
Table of Contents
