Exit; Table 5-15. Security Menu Options; Table 5-16. Exit Menu Options - Supermicro SBI-7426T-SH User Manual

SBI-7426T-SH Blade Module User's Manual
Menu Option
Supervisor Password
User Password
Change Supervisor
Password
Change User
Password
Boot Sector Virus
Protection
5-8

Exit

Choose E from the AMI BIOS Setup Utility main menu with the arrow keys to display
XIT
the E S
XIT ETUP
Menu Option
Save Changes and
Exit
Discard Changes and
Exit
Discard Changes
Load Optimal
Defaults
Load Fail Safe
Defaults

Table 5-15. Security Menu Options

Description
This displays whether a supervisor password has been entered for the system.
"Not Installed" means that a Supervisor password has not been used.
This displays whether a user password has been entered for the system. "Not
Installed" means that a User password has not been used.
Select this option and hit the <E
type in the Supervisor's password in the dialogue box to set or change the
Supervisor password, which allows access to the System's BIOS.
Select this option and hit the <E
following options;
• Full Access (default) – This grants full user read and write access to the
BIOS Setup Utility.
• V O – This allows access to the BIOS Setup Utility, but does not
IEW NLY
allow the fields to be changed.
• L – This allows only limited fields to be changed such as D
IMITED
T .
IME
• No Access – This prevents User access to the BIOS Setup Utility.
NOTE: This option is only available when the Supervisor Password has been set
above.
When E , the AMI BIOS displays a warning when any program or virus
NABLED
issues a Disk Format command or attempts to write to the boot sector of the hard
disk drive. Options include E
menu. All Exit BIOS settings are described in

Table 5-16. Exit Menu Options

Description
Highlight this item and hit <E
the BIOS Setup utility. The system will reboot and implement the changes you
have made to the BIOS Setup.
Highlight this item and hit <E
any changes you may have made. Any changes you have made to the BIOS
Setup will not take effect upon system bootup.
Highlight this item and hit <E
You will remain in the Setup utility.
Highlight this item and hit <E
BIOS Setup. These are the safest settings to use and are designed for maximum
system performance, but may not work best for all computer applications.
Highlight this item and hit <E
maximum system stability, but not for maximum performance.
> key to access the sub-menu and then
NTER
> key to access a sub-menu with the
NTER
and Disabled.
NABLED
> to save any changes you made and to exit
NTER
> to exit the BIOS Setup utility without saving
NTER
> to discard (cancel) any changes you made.
NTER
> to load the default settings for all items in the
NTER
> to load fail-safe settings that are designed for
NTER
5-16
ATE
Table 5-16 below.
and