Table of Contents
Advertisement
SBI-7426T-SH Blade Module User's Manual
Table 5-12. Remote Access Configuration Sub-menu (Continued)
Menu Option
Redirection After
BIOS POST
Terminal Type
VT-UTF8 Combo Key
Support
Sredir Memory
Display Delay
Menu Option
System Health
Monitor Information
5-6
Boot
Choose Boot from the AMI BIOS Setup Utility main menu with the arrow keys to bring
up the B
S
OOT
ETUP
setting using the arrow keys and pressing <E
described in
Table 5-14
Menu Option
Boot Settings
Configuration
Quick Boot
Description
This option allows you to specify redirection after BIOS POST. Options include
the following:
• D
– Turns off the redirection after POST
ISABLE
• B
L
– Redirection is active during Boot Loader
OOT
OADER
• Always – Redirection is always active.
NOTE: Some operating systems may not work if set to Always.
This option allows you to select the Terminal Type for your system. Options
include ANSI, VT100 and VT-UTF8.
Use this option to enable VT-UTF8 Combination Key support for ANSI/VT100
terminals. Options include Enabled and D
This option gives the delay in seconds to display memory information. Options
include No Delay, D
ELAY IN
Table 5-13. System Health Monitor Sub-menu
Description
This sub-menu contains system health information for the following:
• CPU1 Temperature
• CPU2 Temperature
• System Temperature
• CPU1 Vcore
• CPU2 Vcore
• 3.3V Vcc (V)
• +5Vin
• +12V Vcc (V)
• CPU1 DDR3 VTT
• CPU2 DDR3 VTT
• 5V Standby
• Battery Voltage
menu. Security setting options are displayed by highlighting the
below.
Table 5-14. Boot Setup Menu Options
Description
This sub-menu allows you configure settings during system boot.
This option allows BIOS to skip certain tests while booting. This will decrease the
time needed to boot the system. Options include Enabled or D
ISABLED
1 S
, D
2 S
EC
ELAY IN
>. All Security BIOS settings are
NTER
5-14
.
and D
4 S
EC
ELAY IN
EC
ISABLED
.
.
Advertisement
Table of Contents
