Table of Contents
Advertisement
Blade Module Features
This chapter describes the SBI-7426T-SH blade module. Installation and maintenance
should be performed by experienced technicians only.
See
Figure 4-1
Feature
Processors
Memory
Storage
Expansion Slots
Ports
Features
Power Consumption
Chapter 4
Figure 4-1. SBI-7426T-SH Blade Module Front View
for a front view of the blade unit and
Table 4-1. SBI-7426T-SH Blade Module Features
Description
Supports single or dual 1366-pin Intel Xeon 5500/5600 series processors
Supports up to 128 GB of VLP ECC Registered/VLP ECC and 24 GB of
Unbuffered ECC of DDR3-1333/1066/800 SDRAM in twelve DIMM slots
One 2.5" hot-plug SAS2/SATA hard disk drive
One (1) PCI-E 2.0 x16 expansion slot
KVM port (1)
Onboard Hermon graphics chip, IPMI 2.0, ATA/100, Plug and Play, APM
1.2, DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS 2.3, Real Time Clock, Watch
Dog,
Base Power Draw (~35W) / Power per CPU (60W/80W/95W) / Power per
DIMM (typically 14.5W)
Table 4-1
4-1
for its features.
Advertisement
Table of Contents
