Safety And Instructional Decals - Toro Power Clear 621QZE Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
Order part no. 117-9121
1. Cutting dismemberment hazards, impeller and auger—do
not place your hand in the chute; remove the ignition key
and read the instructions before servicing or performing
maintenance.
94-2577
115-5698
117-9102 (Model 38458 only)
Order part no. 117-6036
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—stop the
engine before leaving the
machine.
3. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
4. Fuel spill hazard—do not
tip machine backward.
5. Engine switch On
117-9103 (Model 38459 only)
Order part no. 117-6046
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—stop the
engine before leaving the
machine.
3. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
4. Fuel spill hazard—do not
tip machine backward.
5. Engine switch On
4
6. Engine switch Off
7. Primer
8. Push the primer three
times to prime the engine.
9. Read the Operator's
Manual before checking
engine oil level.
6. Engine switch Off
7. Primer
8. Push the primer three
times to prime the engine.
9. Read the Operator's
Manual before checking
engine oil level.
10. Plug the machine in to
power the electric starter.