Manual Sound Control (Off Option); Stereo/Sap Broadcasts Setup - Zenith P42W46X Installation And Operating Manual

Operation
Sound Menu Options continued
Sound Menu Options continued
Manual Sound Control (
Manual Sound Control (
- You can adjust sound options Balance, Treble, and Bass to the levels you prefer.
1.
Press the MENU button and then use
G
2. Press the button and then use
( Balance, Treble, Bass)
3. Press the G button and then use
4. Press the ENTER button to save.
Stereo/SAP Stereo/SAP Broadcasts Setup Broadcasts Setup
- The TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the
stereo program; if the broadcaster transmits one additional sound signal in addition to the original one.
- Mono: The primary language is heard from left and right speakers. Signal mode is mono.
- Stereo: The primary language is heard from left and right speakers. Signal mode is stereo.
- SAP: The secondary language is heard from left and right speakers in mono sound.
1. Press the MTS button repeatedly.
Mono
• Select mono sound mode if the signal is not clear or in poor signal reception areas.
• Stereo , SAP modes are available only if included on the broadcast signal.
22 Plasma TV
DASP off option and balance)
option and balance)
button to select the
D / E
D / E button to select the desired sound option
.
F / G button to make appropriate adjustments.
Stereo
menu.
SOUND
SAP
DASP
CHANNEL
BBE
PICTURE
AVL
G
Balance 0
L
SOUND
Treble 50
TIMER
Bass 50
SPECIAL
SCREEN
PIP/DW
LOCK
Prev.
Menu
R