Table of Contents
Advertisement
Installation
Installation
Installation
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
Owner's Manual
Power Cord
Installation Instructions
Installation Instructions
GROUNDING
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.
Attaching the
Attaching the
TV assembly to the wall
TV assembly to the wall
- Secure the TV assembly by attaching it to a wall for additional support.
10 Plasma TV
1.5V
Batteries
D-sub 15 pin cable
• Install the TV brackets on the TV as shown.
Insert the 2 bolts and tighten securely, in the upper holes
on the bracket.
Install the wall brackets on the wall with 4 bolts*, (not
supplied with the product), as shown.
Match the height of the TV brackets and the wall brack-
ets.
Check to be sure the brackets are tightened securely.
• Secure the TV assembly to the wall with strong strings
or wound wire cables, (not supplied with the product), as
shown.
Remote Control
DVI Cable
2-TV bracket bolts
2-TV brackets
2-Wall brackets
Power
Supply
Short-circuit
Breaker
Advertisement
Table of Contents
