Table of Contents
Advertisement
Procedure for initiating the test of the display operator:
Sequence of steps
In the P-mode, press
the menu for testing the cashier display (P-mode – Sys. parameter
– Tests):
Confirm by pressing
points on the cashier display.
After successful completion of the cashier display test, the display
reads.
Testing the keyboard
The keyboard test evaluates the successive pressing of keyboard keys. If the keys are pressed in the exact
order defined in Figure 7. 1 and the keyboard or its circuits are not damaged, the test will be completed
successfully.
Procedure for initiating the keyboard test:
Sequence of steps
In the P-mode press
menu for testing the keyboard (P-mode – Sys. parameter – Tests):
Confirm by pressing
order shown in figure 7. 1. Begin with the
the
TOTAL key.
After successful completion of the test, the display reads:
Course of the test:
Gradually press the individual keyboard keys in the direction of the arrows in Figure 7. 1.
If a key is pressed in the incorrect order, a sound signal will announce the error until the correct key is pres-
sed (the next according to the test).
You can end the keyboard test at any time by pressing
or
and then press
TOTAL. The display will gradually light up all
or
and then press
TOTAL and gradually press the keys in the
TOTAL to enter
TOTAL to enter the
(MENU) key and end with
TOTAL .
Helpful advice
Displej obsluhy
Tests
Cashier displ
Test OK
Display
Tests
Keyboard
Keyboard
working...
Test OK
79
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-50TE Mini and is the answer not in the manual?
Questions and answers
laba diena, ar yra galimybė ELKOM Euro-50TE Mini prijungti prie interneto ir mokesčių inspekcijai perduoti duomenis