ELCOM Euro-50TE Mini User Manual page 32

Programming the cash register
• MEASUNIT.EDF – sales units
• OPERATOR.EDF - cashiers
• PLU.EDF – product items
• SURDISC.EDF – add-ons and discounts
• TAXGROUP.EDF – taxation levels
• TEXTLOGO.EDF – text logo
Warning:
Until stored data from the cash register has been stored to a memory card, further exporting will cause it to
be overwritten and irrevocably lost.
Importing of data
The „Import" function serves for pulling data from the SD memory card to the cash register memory. You can
use this function to renew PLUs, for example, in the case of an upgrade of the cash register software.
System parameters
Import
In the first version, it is possible to import only product items (PLUs).
Import
PLUs
For successful import of PLUs, the file „PLU.EDF", which contains PLUs and was created by an export from
the cash register, must be on the memory card, or alternatively, import can be performed with the help of the
„Euro-50 PLU Editor" program, which you can download from our Web site at www.elcom.eu.
Warning:
• When importing, all PLUs stored in the cash register will be overwritten with PLUs from the SD memory
card and will be irrevocably lost.
• During an export or import of cash register data, do not shut off the register and do not remove its
battery cover!
• For correct import of function, the name of the file has to be correct with the data, that has to be like
mentioned above.
PERIPHERALS
Note:
Prior to programming read as soon as possible the section „General procedure when programming in P-
-mode", which is found at the start of the chapter „Programming the cash register"..
P-mode
Peripherals
In this menu you can configure the parameters for peripheral attachments such as a bar-code scanner and
an electronic scale.
Table 3.13 – Peripherals - move through the menu using the arrow keys
Menu Abbrev. Name of sub-menu Description of sub-menu
Peripherals
1
32
Scanner
Parameters and communications port for communicating with
a scanner
 
or