Flanders Scientific LM-0750W User Manual page 25

System Menu (continued)
System Menu Organization
Main Menu
Function DVI Selection
Scopes & VU-Meters DVI Pixel Format
Video Component Input
Audio Component Pixel Format
Marker 3G Level B
System SDI Hue Adjustment
Alarm Back Light
OSD Back Light Interval
GPI LED Light
Display Alignment Language
System Status Part Display
Support Load Profile
Save Profile
System Menu Functions (continued)
SDI Hue Adjustment
This option allows you to activate the HUE adjustment knob while monitoring in SDI. In analog monitoring
modes (i.e. Composite Video) the HUE adjustment will always be active. Technically speaking Serial Digital
being both a Digital and YCbCr or RGB video format should not require a HUE adjustment, but should you
wish to have such an adjustment in SDI you should turn this option ON.
Back Light
This option allows you to set the Backlight setting (15~100) to adjust peak white luminance level.
Back Light Interval
The backlight interval is a power saving feature; It allows you to specify the amount of time without an active
signal being shown on the monitor that should be allowed to expire before the monitor's backlight is turned off
to reduce the power consumption of the unit. When placed in the On position the monitor will not enter the
power saving mode and will keep the backlight on so long as the monitor is left on.
LED Light
Allows you to turn off the LED lights on the Monitor's Keypad.
Part Display
Toggles whether just the center part (On) or entire source (Off) is shown in Sub Window Mode.
Load Profile
Recall Saved Profile Settings. Highlight desired profile & press ENTER to activate the saved profile selection.
Save Profile
Saves all current monitor settings under a recallable profile by highlighting Profile number & pressing ENTER.
System
DVI-D
Full RGB
COMPONENT
YPbPr
Stream 1
English
Default
Profile 1
25
Back to Table of Contents
Off
35
On
On
Off
© 2012 Flanders Scientific, Inc.