Flanders Scientific LM-0750W User Manual page 21

Scopes & VU Meters Menu (continued)
Scopes & VU Meters Menu Organization
Main Menu
Function Scopes & VU Meters
Scopes & VU-Meters Window 1
Video Window 2
Audio Waveform Position
Marker Scopes Stack
System Waveform Scale
Alarm Audio Display Mode
OSD Alignment Level
GPI Permitted Max Level
Display Alignment Audio Display Channels
System Status OSC Mode
Support
Audio Display Mode
This option can be set to either Groups or Pairs. When organized in pairs the odd channels will be displayed
on the left side of the screen and even channels of the right side of the screen. When organized in groups the
channels will be arranged with all channels of an Audio Group displayed on the same side of the screen to-
gether.
Audio Display Channels
Allows you to select the Audio Level Meters Channels that will be shown on the Vertical or Horizontal Audio
Level Meters. Select from Channels 1-2, 1-8, 9-16, or 1-16.
Permitted Max Level
Allows you to specify the Max Audio Level for your onscreen Audio Level Meters:
Select from: -10 dBFS, -9 dBFS, or -8 dBFS
OSC Mode (LM-0750W Only)
Activating this option, only available on the LM-0750W, will gener-
ate a quad viewing mode with 2 Scopes of your choice (Window 1
and Window 2) as well an Audio Phase Meter and 2 Channel Audio
Level Meters in addition to a preview window showing the active
signal whenever the corresponding Scopes and VU Meters profile
is selected.
Scopes & VU Meters
Luminance
Bottom Right
Horizontal
IRE Level
21
*NOTE: The Scope & VU Meters
Profile 1
Menu only sets your Waveform, Vec-
tor, & Audio Level Meter display
Vector
preferences. To toggle the onscreen
display of your configured Scopes &
VU Meters
Scopes & VU Meters profiles to spe-
cific keys. See the
section of this manual for more de-
Pairs
tails.
-18 dBFS
-9 dBFS
1-16
Off
© 2012 Flanders Scientific, Inc.
Back to Table of Contents
profiles assign the
Function Menu