Table of Contents
Advertisement
Answering system operation
Message playback
On the telephone base, when playback begins, the total number of old or new
messages is announced, and the message window displays the message
number currently playing.
On a handset, when playback begins, the total number of new and old
messages is announced, and it displays the number of old and new messages.
Before each message, you hear the day and time of the recording. If the date and
time are not set, you hear, "Time and date not set," before playback.
After the last message, you hear, "End of messages."
If the recording time is less than three minutes, you hear, "Less than three minutes
to record."
If there is no remaining recording time, you hear "Memory is full."
If there are no recorded messages, the screen shows No message and you hear,
"You have no message."
To play messages at the telephone base:
/PLAY/STOP when the phone is not in use.
• Press
Options during playback:
• Press VOL - or VOL + to adjust the message playback volume.
/SKIP to skip to the next message.
• Press
/REPEAT to repeat the message. Press
• Press
the previous message.
• Press X/DELETE to delete the playing message.
/PLAY/STOP to stop the playback.
• Press
To play messages on a handset:
1. Press MENU when the phone is not in use.
2. Press SELECT to choose Play messages.
Options during playback:
• Press /VOLUME or /VOLUME to adjust the message playback volume.
• Press 6 to skip to the next message.
• Press 4 to repeat the message. Press 4 twice to hear the previous message.
• Press 3 to delete the playing message.
• Press OFF to stop the playback.
• Press
to switch between the speakerphone and the handset earpiece.
/REPEAT twice to listen to
46
Advertisement
Table of Contents
