Table of Contents
Advertisement
3
The Plasma 80HF has many benefits over traditional transformer plasma cutters,
including infinite power control, HF pilot start and HF pilot restart which is ideal for cutting
mesh etc , quick fitting cost effective torch, long life cost effective torch consumables and
a 60% industrial duty cycle
We want you to take pride in operating our Plasma 80HF as much pride as we have taken
in making this product for you. Please read all information in this manual before operation
PLEASE EXAMINE CARTON AND EQUIPMENT FOR DAMAGE IMMEDIATELY
When this equipment is shipped, title passes to the purchaser upon receipt from the courier.
Consequently all claims for material damaged in shipment must be made by purchaser against the
transportation company used.
Please record your plasma cutting equipment identification below for future reference. This information
can be found on data plate at rear of machine.
Product Plasma 80HF
Serial No. ___________________________________
Date of Purchase _____________________________
Where Purchased _____________________________
Whenever you request replacement parts or information on this equipment please always supply
information you have recorded above
This product is covered by 2 years parts and labour warranty, you are responsible for costs of shipping
unit to us, we will cover cost of returning item to you. External items, torch, earth lead etc are covered by
3 months warranty. Any faults/damage found caused by customer will be charged pro-rata.
Pay particular attention to the safety instructions we have provided you for your
protection
The level of seriousness to be applied to each section is explained below
WARNING
This statement appears where the information must be followed exactly to avoid serious personal
injury.
CAUTION
This statement appears where the information must be following to avoid a minor personal injury
or damage to this equipment.
Introduction
Advertisement
Table of Contents
