Attaching the stand
To complete the stand installation you will need a Phillips screw driver.
Place the TV set on a fl at and clean surface with the panel facing downwards to avoid damage.
1 1
(fi g.1) Attach the stand neck to the rear of the TV set.
11
/2
3 3
(fi g.3) Attach the neck to the stand base.
8
6 x
M (4x14)
2 2
(fi g.2) Secure the neck to the TV by using
the 6 x M(4x14) screws provided
4 4
(fi g4) Secure the neck to the base using
the 5 x ST(4x25) screws provided.
5 x ST (4x25)