Download Print this page

Advertisement

Quick Links

IMPORTANT: PLEASE READ THIS MANUAL
BEFORE INSTALLING UNIT
Warnings
DO NOT CONNECT POWER SUPPLY until unit is completely installed. Make sure electrical service to the fan and light is locked in
"OFF" position.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS – OBSERVE THE FOLLOWING:
a. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact your manufacturer's representative.
b. CAUTION: Before installation, servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being
switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as tag, to the service panel.
c. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards. This unit is only for use in non-
fire-rated installations.
d. When cutting or drilling into wall and ceiling, do not damage electrical wiring and other hidden utilities.
e. NEVER place a switch where it can be reached from a tub or shower.
f. If this unit is installed over a tub or shower, it must be connected to a GFCI (Ground Fault Circuit Interrupter) – protected branch circuit.
g. The combustion airflow needed for safe operation of fuel burning equipment may be affected by this unit's operation. Follow the heating equipment manufac-
turer's guidelines and safety standards such as those published by the National Fire Protection association (NFPA), the American Society of Heating,
Refrigeration, and Air Conditioning Engineers (ASHRAE) and the local code authorities.
h. Exhaust fans must always be vented to the outdoors.
CAUTION: "For General Ventilation Use Only. Do Not Use To Exhaust Hazardous Or Explosive Material and Vapors."
CAUTION: BULB USED IN FLUORESCENT MODELS NOT DIMMABLE
CAUTION: USE ONLY TCP XR3014 BULBS IN FLUORESCENT MODELS AND PAR 16 IN HALOGEN MODELS
PREMIUM BATH FAN MODELS
PB100 • PB100F • PB100H • PB190 • PB230-2 • PB230F-2 • PB230H-2
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
PB230FV-2 • PB230HV-2 • PB360-2
PB Series
Premium Bath Fans

Advertisement

loading
Need help?

Need help?

Do you have a question about the PB Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Fantech PB Series

  • Page 1 PB Series Premium Bath Fans IMPORTANT: PLEASE READ THIS MANUAL BEFORE INSTALLING UNIT Warnings DO NOT CONNECT POWER SUPPLY until unit is completely installed. Make sure electrical service to the fan and light is locked in “OFF” position. WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS – OBSERVE THE FOLLOWING: a.
  • Page 2 For the quietest possible installations, Fantech recommends a minimum of 8' of to secure the wiring through the knockout insulated flexible duct between any inlet grille and fan. When using flexible type provided on the side of the terminal box.
  • Page 3 Step 5 - Connect the fan to the housing. Install the 4" or 6" duct work from the fan to the ceiling grille housing. Insulated flexible type duct work (recommended for all Fantech bathroom exhaust applications) will result in much quieter operation. Secure duct work in place and seal. If using Insulated flexible duct work, seal the...
  • Page 4 Limitation of Warranty and Liability This warranty does not apply to any FANTECH INC. product or part which has failed as a result of faulty installation or abuse, incorrect electrical connections or alter- ations made by others, or use under abnormal operating conditions or misapplication of the product or parts. We will not approve for payment any repair not made by us or our authorized agent without prior written consent.