Table of Contents
Advertisement
6 Upgrade your TV Software
Philips continuously tries to improve its products and we strongly
recommend that you Upgrade the TV Software when Upgrades are
available.
New Software can be Downloaded from our website at
www.philips.com/support
using the model number of your TV to find information.
Checking your Current Software version
1
Press Q and use H I to select Features, then press OK.
2
Use H I to select Software upgrade, then press OK.
Picture
Current software info
Sound
Upgrade
Setup
Features
Language
USB
3
Use H I to select Current software info, then press OK.
The version and a description of the Current Software is displayed.
●
Picture
Sound
Release Version:
Setup
XXXXXXX_XX_XX_XXXX_XX
Features
Language
USB
Upgrading the Software
You can Upgrade the Software by using a USB Memory Stick.
Preparing for the Software Upgrade
You require the following equipment :
A PC with web browsing capability.
●
An archive utility that supports the ZIP-format (e.g. WinZip for
●
Windows or Stuffit for Mac OS).
A Blank empty clean formatted USB Memory Stick.
●
Note(s)
Only FAT / DOS-formatted portable memory is supported.
●
Use only Software Upgrades that can be found on the Philips website.
●
Downloading the Software
Find information and Software related to your TV and Download the
Latest Software Upgrade file to your PC.
1
On your PC, open a web browser and go to
www.philips.com/support
2
Enter the model number in the "Type the Model Number..." field.
3
Click the desired Software to be Downloaded.
●
4
Copy the Upgrade file to the Empty root directory on the clean
formatted USB Memory Stick.
Starting the Software Upgrade
When the Software Upgrade is running, don't press any keys.
●
Do Not remove the USB Memory Stick during the Software Upgrade.
●
If an Error occurs during the Upgrade, retry the procedure or for further assistance, please
●
contact the Call Center.
1
Connect your USB Memory Stick with the Upgrade file to the USB
Service Port on the side of your TV. Use only the Unit's Front Panel
Keys to enter the following Instruction Steps 2 to 6.
Back
2
Press MENU and use H I to select Features, then press OK.
3
Use H I to select Software upgrade, then press OK.
4
Use H I to select Upgrade, then press OK.
5
Read the On-screen instructions and confirm that you want to
continue with the Installation.
Picture
Sound
Setup
Features
Language
USB
6
When the Software Upgrade is completed, press B to set the Unit
into Standby mode, then remove the USB Memory Stick and then
press B again to Turn the Unit back On.
●
Decompress the ZIP-file.
Warning
Would you like to upgrade the
software?
The TV starts up with the New Software.
For further assistance, please contact the Call Center.
34
.
English
Start now
Advertisement
Table of Contents
