Graco PD265358C Owner's Manual page 45

VEHICLE SEAT BELTS
Lap belts with retractors may or may not hold a
child restraint securely.
Follow these steps to determine if you have a
retractor system that will hold child restraint
securely:
a. Pull belt all the way out
b. Allow belt to retract about 6 in (15 cm)
c. Pull out on belt again.
If belt is locked and you cannot pull the belt out
any further, you have an Automatic Locking
Retractor which may be used as a child restraint.
Remember, when installing a child restraint, pull
belt all the way out, buckle belt, and then tighten.
If you can pull the belt out again (step c above),
you must have an Emergency Locking Retractor
which MUST NOT be used with a child restraint.
(continued)
Retractor
45