Graco PD265358C Owner's Manual page 38

5. Attach harness straps
to splitter plate.
For Infants or Small Toddlers:
(When using harness slot 1)
Slot
• Put Top right strap loop on splitter plate first,
5
then attach Top left strap loop (fig. g - fig. h).
Slot
OR
4
(When using harness slots 2 or 3)
Slot • Put Middle right strap loop on splitter plate first,
3
then attach Middle left strap loop. (fig. j - fig. k).
Slot
NOTE: Make sure ends of straps are in front of
2
splitter plate (fig. i or fig. l).
Slot
1
For Toddlers:
(When using harness slots 4 or 5)
• Put Bottom right strap loop on splitter plate
first, then attach Bottom left strap loop (fig. m - fig. n).
CHECK that the loops are completely within the splitter plate (fig. o).
Make sure both harness straps are set to the same harness slot level.
38
Top
Loop
Middle
Loop
Bottom
Loop