Control The Wireless Radio; Enable Or Disable The Wireless Radio - NETGEAR JNR1010v2 User Manual

Control the Wireless Radio

The router has an internal wireless radio that broadcasts signals in the 2.4 GHz range. By
default, it is enabled so that you can connect wirelessly to the router. When the wireless radio
is disabled, you can still use an Ethernet cable for a LAN connection to the router.

Enable or Disable the Wireless Radio

To enable or disable the wireless radio:

1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
5. Select or clear the Enable Wireless Radio check box.
Clearing this check box turns off the WiFi feature of the router.
6. Click the Apply button.
Your changes are saved.
N150 and N300 Wireless Routers
Networking
38