Verify The Cabling - NETGEAR JNR1010v2 User Manual

Verify the Cabling

Verify that your router is cabled correctly and the cables are attached securely by checking
the router LEDs:
• The Power LED
• The WiFi LED
• The Internet LED
• The Ethernet LEDs (1 through 4)
computers cabled to the router by an Ethernet cable.
For information about troubleshooting with the LEDs, see
page 67.
N150 and N300 Wireless Routers
is lit solid green when the router is turned on.
is lit solid green.
is lit solid green.
Hardware Setup
10
are lit solid green or solid amber for any
Troubleshoot with the LEDs on