Advertisement
SETUP INSTRUCTIONS FOR IRRADIA NOIR
Read and Understand the entire Nu-Flame Manual prior to use.
Make certain to inspect the package thoroughly. Carefully remove and unwrap your Nu-Flame fireplace.
Your fireplace will have the following components:
1. Stainless Steel Burner
2. Black Burner Holder/Base
3. 4 Stainless Stand-offs with 4 thumb screws
4. Glass Wind Screens/Legs (2 each)
5. Snuffer Tool
You may wish to purchase a funnel for pouring fuel into the burner
To make certain you have assembled your Nu-Flame Irradia Fireplace correctly.
NOTE: GLASS MUST NOT BE TOUCHING THE STAINLESS STEEL BURNER
Correct
635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax 407-426-7721
Please review the images below.
http://shop.bluworldusa.com ·
Wrong
www.nu-flame.com
Advertisement
