Asus Z97-K R2.0 User Manual page 24

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Light Blue (Rear
panel)
Lime (Rear panel)
Pink (Rear panel)
Pink (Front panel)
To configure a 7.1-channel audio output:
8. USB 2.0 ports 7 and 8. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.
9. USB 3.0 ports 3, 4, 5 and 6. These 9-pin Universal Serial Bus (USB) ports connect to
USB 3.0/2.0 devices.
•
•
•
•
DVI-D port. This port is for any DVI-D compatible device. DVI-D can't be converted to
10.
output RGB Signal to CRT and isn't compatible with DVI-I.
•
•
11. PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.
1-14
Headset
4.1-channel
2.1-channel
Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Mic In
–
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows
operating system.
Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under
Windows OS environment and after the USB 3.0 driver installation.
®
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
Multi-VGA output supports up to three displays under Windows
displays under BIOS, and one display under DOS.
Intel display architecture design supports the following maximum supported pixel
®
clocks (Pixel Clock = H total x V Total x Frame Rate (Screen refresh rate)):
- DVI port: 165 MHz
- VGA port: 180 MHz
- HDMI port: 300 MHz
5.1-channel
Mic In Bass/Center
–
Chapter 1: Product introduction
7.1-channel
Bass/Center
– Side Speaker Out
OS environment, two
®
®