Transmitter And Receiver; Electronic Speed Control - Traxxas Summit Owner's Manual

Your model is equipped with the newest TQi 2.4GHz
transmitter with Traxxas Link ™ Model Memory. The
transmitter has two channels for controlling your throttle
and steering. The receiver inside the model has 5 output
channels. Your model is equipped with one servo and an

electronic speed control.

TRANSMITTER AND RECEIVER

Set Button
Red/Green Status LED
see page 30 for more info
Menu Button
Steering
Trim
Multi-Function
Knob
Shift Switch
(Channel 3)
Throttle
Trigger
Link
Button
Power Switch Battery Compartment
** Accessory sensor port for use with the Telemetry Expander Module (see Traxxas.com for more information)
MODEL WIRING DIAGRAM
Channel 4 Front
T-Lock Servo
T-Lock Switch (Channel 4)
Steering
Wheel
Antenna
** Accessory sensor ports for use with optional voltage, temperature, and RPM sensors
(see Traxxas.com and included materials for more information)
EVX-2 ELECTRONIC SPEED CONTROL
Sensor Expansion
Port **
LED
TRAXXAS TQ
Channel 1
Steering Servos
Channel 3
Shift Servo
to
LED Lights
Channel 5
V/T - Voltage/Temp Sensor Port**
RPM - RPM Sensor Port**
Rear T-Lock
BATT/
Servo
CH5 - Battery/Channel 5
CH4 - Channel 4
CH3 - Channel 3
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Channel 1
To Motor
High-Current
Battery Connector
Heat Sinks
LED
RADIO SYSTEM
i
Motor
(Titan ® 775)
Channel 2
EVX-2 Electronic
Speed Control
EZ-Set Button
EVX-2 Wiring Diagram
SUMMIT • 11