Table of Contents
Advertisement
Chapter 2: Camera Configuration
SNMP
Simple Network Management Protocol (SNMP) is a protocol that can be
used to manage and monitor SNMP-enabled devices over a network. The
SNMPv1, SNMPv2 and SNMPv3 settings for the IP camera can be configured
in this page.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
SNMP v1/v2
Enable SNMP v1/v2
Enables or disables SNMPv1 and SNMPv2 support.
Read Community
Used to configure the read community string.
Write Community
Used to configure the write community string.
Traps for SNMP v1/v2
Enable Traps
Enables the IP camera to send SNMP trap messages.
Trap Address
Specifies the IP address of the trap server to receive the trap messages.
Trap Community
Used to configure the trap community string.
SNMP v3
Enable SNMP v3
Enables or disables SNMPv3 support.
User name
Used to configure the SNMPv3 username.
User password
Used to configure the SNMPv3 password.
40
NCi-311/NCi-311-R User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the NCi-311 and is the answer not in the manual?
Questions and answers