Trap Configuration
A trap manager is a management station that receives the trap messages generated by the switch. If no
trap manager is defined, no traps will be issued. Create a trap manager by entering the IP address of the
station and a community string. To define a management station as a trap manager, assign an IP
address, enter the SNMP community strings, and select the SNMP trap version.
• IP Address: Enter the IP address of the trap manager.
• Community: Enter the community string.
• Trap Version: Select the SNMP trap version type—v1 or v2c.
• Click Add .
• To remove the community string, select the community string listed in the current managers field and
click Remove .
Figure 3.3-38 Trap Configuration interface
79
Chapter3