2.9 Dual Homing Application
The Dual Homing function is to prevent the connection loss between the particular X-
Ring group and the upper level/core switch. Assign one port, and only one, to be the
Dual Homing port that is the backup port in each single X-Ring group. The Dual
Homing function only works when the X-Ring function is active.
Note
The Ethernet switches with firmware version before v3.0 use the X-Ring
function that has the limitations as follows. However, the ones with
firmware version after v3.0 (included) use the X-Ring Pro function that
gets rid of the limitations.
1. In Dual Homing application architecture, the upper level switches need
2. The switches to be configured as members of the Dual Homing group
3. As the figure illustrated above, Dual Homing only supports two X-ring
EKI-7656C_7656CI_Manual
to enable their Rapid Spanning Tree protocol.
cannot be the X-Ring Master device of their X-ring group.
groups.
24