ZP5 - USSR Zone 4
ZP6 - USSR Zone 5
WAST - West Australian Standard
CCT - China Coast, USSR Zone 7
JST - Japan Standard, USSR Zone 8
EAST - East Australian Standard GST
Guam Standard, USSR Zone 9
IDLE - International Date Line
NZST - New Zealand Standard
NZT - New Zealand
• SNTP Sever URL: Set the SNTP server IP address.
• Switch Timer: Displays the current time of the switch.
• Daylight Saving Period: Set up the Daylight Saving beginning time and Daylight Saving ending time.
Both will be different in every year.
• Daylight Saving Offset (mins): For non-US and European countries, specify the amount of time for
day light savings.
• Synchronization Interval (secs): The Synchronization Interval is used for sending synchronizing
packets periodically. Users can assign the time ranging from 64 to 1024 seconds. The "0" value
displaying by default means that you disable the auto-synchronized feature in the SNTP client mode.
You can enable the feature by filling the interval range from 64 ~ 1024 seconds.
• Click Apply .
+5 hours
+6 hours
+7 hours
+8 hours
+9 hours
+10 hours
+12 hours
Figure 3.3-16 SNTP Configuration
57
5 pm
6 pm
7 pm
8 pm
9 pm
10 pm
Midnight
Chapter3