Tftp Commands Set; Systemlog, Smtp And Event - Advantech eki-7656c User Manual

no 8021x
3.2.14

TFTP Commands Set

Table 3.14: TFTP Commands Set
Command
backup flash:backup_cfg
restore flash:restore_cfg
upgrade flash:upgrade_fw
3.2.15

SystemLog, SMTP and Event

Table 3.15: SysLog,SMTP,Event Commands Set
Command
systemlog ip
[IP address]
systemlog mode
[client|server|both]
show systemlog
show systemlog
no systemlog
smtp enable
smtp serverip
[IP address]
smtp authentication
smtp account
[account]
smtp password
[password]
smtp rcptemail
[Index] [Email address]
show smtp
no smtp
event device-cold-start
[Systemlog|SMTP|Both]
event authentication-failure
[Systemlog|SMTP|Both]
event X-ring-topology-change
[Systemlog|SMTP|Both]
event systemlog
[Link-UP|Link-Down|Both]
event smtp
[Link-UP|Link-Down|Both]
show event
no event device-cold-start
no event authentication-failure
no event X-ring-topology-change
no event systemlog
EKI-7656C_7656CI_Manual
Disable 802.1x function
G
Level Description
Save configuration to TFTP and need
to specify the IP of TFTP server and
G
the file name of image.
Get configuration from TFTP server
and need to specify the IP of TFTP
G
server and the file name of image.
Upgrade firmware by TFTP and need
to specify the IP of TFTP server and
G
the file name of image.
Level Description
Set System log server IP address.
G
Specified the log mode
G
Displays system log.
E
Show system log client & server
P
information
Disable systemlog functon
G
Enable SMTP function
G
Configure SMTP server IP
G
Enable SMTP authentication
G
Configure authentication account
G
Configure authentication password
G
Configure Rcpt e-mail Address
G
Show the information of SMTP
P
Disable SMTP function
G
Set cold start event type
G
Set Authentication failure event
G
type
Set X - ring topology changed
G
event type
Set port event for system log
I
Set port event for SMTP
I
Show event selection
P
Disable cold start event type
G
Disable Authentication failure
G
event type
Disable X - ring topology changed
G
event type
Disable port event for system log
I
38
switch(config)#no 8021x
Defaults Example
switch(config)#backup flash:backup_cfg
switch(config)#restore flash:restore_cfg
switch(config)#upgrade lash:upgrade_fw
Example
switch(config)# systemlog ip 192.168.1.100
switch(config)# systemlog mode both
Switch>show systemlog
switch#show systemlog
switch(config)#no systemlog
switch(config)#smtp enable
switch(config)#smtp serverip 192.168.1.5
switch(config)#smtp authentication
switch(config)#smtp account User
switch(config)#smtp password
switch(config)#smtp rcptemail 1
switch#show smtp
switch(config)#no smtp
switch(config)#event device-cold-start both
switch(config)#event authentication-failure both
switch(config)#event X-ring-topology-change both
switch(config)#interface fastethernet 3
switch(config-if)#event systemlog both
switch(config)#interface fastethernet 3
switch(config-if)#event smtp both
switch#show event
switch(config)#no event device-cold-start
switch(config)#no event authentication-failure
switch(config)#no event X-ring-topology-change
switch(config)#interface fastethernet 3
Alert@test.com