Table of Contents
Advertisement
2.3 Quick Setup
The Quick Setup procedure lets you configure all the settings required for quick
Internet access.
.
The initial Quick Setup screen presents time settings.
Set Time Zone — Use the drop-down menu to select your time zone.
Time Server Address — Enter the IP address/hostname of the time server. This
isn't normally required, but if the default time server (NTP) should go offline, you
can obtain a new NTP server from the list at http://www.ntp.org.
Daylight Savings — If your locale uses Daylight Saving, activate "Enable Function"
and select the duration using the drop-down menus.
SYSTEM & NETWORK SETUP
7
Advertisement
Table of Contents
